0
In short: Yes.
As long as the voltage is the same, it makes no difference if the rated current is higher on the supply than on the device you want to operate. If you would take a 1.5 amp adapter for a 2 amp device, you overload the adapter which results in shut down or failure.
What else can I help you with?
Can you use a 13v 2.77 amp ac adapter in place of a 12v 3.0 amp ac adapter?
It is not recommended to use a higher voltage adapter than what is specified for your device. Using a 13V adapter instead of a 12V adapter may damage your device due to overvoltage. It is best to use the adapter with the exact voltage and current specifications that are recommended by the manufacturer.
What if I Used wrong ac adapter in electronic device?
If the AC adapter gives too little voltage, the electronic device will probably not work. If it gives too high a voltage, you will probably burn out the electronic device, which will have to be replaced or rewired. If the AC adapter is too weak (provides less milli-amperes than the device needs), the AC adapter can burn out. In summary, you need to check: (a) that the adapter should have the correct voltage, and (b) that it provides the required amount of milliamperes (or more) for the device.
Can you use a 3 amp adapter on 5 amp device?
NO
Can you use a 12V 500mA switching adapter on device that originally required a 12V 2A?
Not for very long. If the device actually requires 2A in order to do its job, then the adapter ... which is only designed to deliver 0.5A or less ... will get warm, then overheat, and then fail. Possibly in as little as a few seconds.
Can 12V 1A adapter be used for 12V 2A device?
no, it may damage the appliance.1Can_12V_2A_adapter_be_used_for_12V_1A_device, 2a adapter cannot be used for 12v, 1a device if the so mentioned parameters are input parameters of the device.Yes, a 12 volt 2 amp adapter has more that enough capacity to operate a 12 volt 1 amp device. In fact the adapter can operate devices up to a limit of 12 volts 2 amps. A device larger than 2 amps connected will tend to heat the adapter up and eventually cause it to fail.
Can you use 15V 4A adaptor for your laptop instead of 19V 3.42A?
No. The machine will notice that it isn't getting all the required voltage and won't run.
Can you use a 19 volt 4.5 amp ac adapter to substitute a 19v 4.74 amp adapter?
Yes these voltages are close enough to be interchangeable.
Can you use a 12V DC adapter for 5V DC device?
input voltage is strictly according to applications. If use 12V dc adapter power 5V dc device, the 5v dc device would be damaged.
Ac adapter is it ok to use lower voltage 19v 4.74a ac adapter has died. Can I use a spare I have in the mean time it's output is 12v and 5a?
not unless you want to fry your electronics
Hi can you use a power supply of 19V and 7A with a Laptop which require a 19V and 5A?
No. You have to have 19v and 5a
Can you use a 9v dc 1000ma adaptor for a device that has 'power input' of 15v dc 800ma?
A: Disregarding the fact of different voltages there is the power to be concerned 9v x 1A = 9W, 15V X .8 = 12W. THE DEVICE WILL BE UNDER POWER.
Can you use a 300mA adaptor on a 1A device?
Yes, you can use a 300mA adapter on a 1A device, but it may not work properly or could damage the adapter. The device may draw more current than the adapter can provide, leading to insufficient power, potential overheating, or failure of the adapter. It's always best to use an adapter that meets or exceeds the device's current requirements for optimal performance and safety.
How do you use a travel adapter to charge your devices while traveling?
To use a travel adapter to charge your devices while traveling, first plug the adapter into the wall outlet in the country you are visiting. Then, plug your device's charging cable into the adapter. Make sure the voltage on the adapter matches the voltage requirements of your device. Finally, connect your device to the charging cable and wait for it to charge.
Can you use 9V 500mA adapter for 9v 700mA 6.3VA device?
yes, if the other adapter is a va
Can you use a 3.7v ac adapter for a digital camera that recommends a 4.3v adapter?
NO! It will fry your device. Use same V and possibly higher amp rated adapter.
Can you replace an AC Adapter of 19.5 V and 3.34 A with a 19.5 V and 4.62 A?
It sounds like you are referring to a universal adapter. A universal ac adaptor has several tips, which adjust the voltage and amperage, and the higher the voltage, the lower the amperage. Therefore, if your adapter is 4.3 amps at 15 volts, it will be significantly lower amperage at 19 volts.
Can you use a 13v 2.77 amp ac adapter in place of a 12v 3.0 amp ac adapter?
It is not recommended to use a higher voltage adapter than what is specified for your device. Using a 13V adapter instead of a 12V adapter may damage your device due to overvoltage. It is best to use the adapter with the exact voltage and current specifications that are recommended by the manufacturer.
