answersLogoWhite

0

Yes, as long as the rating of the breaker is high enough. Do not use a 20 amp breaker with 14 ga wire however. 14 ga wire can not have a breaker ratered high than 15 amps serving it.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Natural Sciences

Have 110volt refrigerator on a 30 amp breaker is that right?

Check the MFG for the amps it uses, if it is suppose to be on a regular 20amp line, then replace the breaker with a 20amp breaker. With the 30amp breaker,it will work, but if there is a surge, you could send too much power to the appliance and fry it. Most refrigerators, are just on a regular 120v household outlet. Besides a 30amp breaker must have 10ga wire, if the wire is 12ga,it can not be attached to a 30amp breaker.


What would cause a refrigerator to overload the circuit breaker?

An overloaded circuit breaker for a refrigerator can be caused by multiple factors, such as a malfunctioning compressor drawing more current than normal, a damaged power cord or outlet, or a short circuit within the refrigerator's electrical components. It is important to have a qualified technician inspect the refrigerator to identify and address the specific cause of the overloading.


What cause circuit breaker to trip when refrigerator plug in?

If you can plug the fridge into another outlet and it comes on, then the issue is either a bad outlet connection or the circut breaker may be going out and needs replacement. Try the fridge on another outlet 1st. If it trips that one too then there is a short in your fridge.


How big of breaker do you use for 115 volt?

Depends on the wire size used in the circuit. If you use AWG # 14 wire you must use a 15 amp breaker. If it is wired with AWG # 12 wire then you use a 20 amp breaker. If a AWG # 10 wire is used then a 30 amp breaker is required. The breaker protects the wiring from overheating so you must use the proper size breaker for the wire used.


What kind of a GE circuit breaker can you use in place of a GE tandem breaker?

You can use a GE tandem breaker of the same size and specifications to replace another GE tandem breaker. It is important to refer to the electrical panel's specifications and the breaker compatibility list to ensure the right fit and proper function. Always consult a qualified electrician if unsure.

Related Questions

Can you use a 30 amp breaker for a refrigerator?

Not unless the wire going to the refrigerator outlet is AWG 10/2. If it is wired with 12/2 wire then you must use a 20 amp breaker. Using a 30 amp breaker is dangerous and a fire hazard.


What is the process for performing an ice breaker replacement in a refrigerator?

To perform an ice breaker replacement in a refrigerator, first unplug the refrigerator and locate the ice maker. Remove any ice from the ice maker and then carefully detach the old ice breaker. Install the new ice breaker in its place, ensuring it is securely attached. Plug the refrigerator back in and test the ice maker to ensure it is working properly.


Why does your refrigerator keep popping the breaker?

The load current is greater that the amperage of the breaker. Add up everything that is plugged into the circuit. If the total is greater that the number marked on the handle of the breaker unplug some of the equipment.


How does a circuit breaker protect a refrigerator?

A circuit breaker protects a refrigerator by interrupting the electrical flow in the event of an overload or short circuit, preventing potential damage to the appliance and reducing the risk of fire. When the refrigerator draws more current than the circuit can safely handle, the breaker trips, cutting off power to the unit. This safeguard helps maintain the integrity of the refrigerator's electrical components and ensures safe operation. By resetting the breaker once the issue is resolved, the refrigerator can resume normal functioning.


Have 110volt refrigerator on a 30 amp breaker is that right?

Check the MFG for the amps it uses, if it is suppose to be on a regular 20amp line, then replace the breaker with a 20amp breaker. With the 30amp breaker,it will work, but if there is a surge, you could send too much power to the appliance and fry it. Most refrigerators, are just on a regular 120v household outlet. Besides a 30amp breaker must have 10ga wire, if the wire is 12ga,it can not be attached to a 30amp breaker.


What size breaker should be used for a fridge?

For a standard refrigerator, a 15-20 amp circuit breaker is typically recommended.


What are the steps to take when replacing ice breakers in a refrigerator?

Unplug the refrigerator to ensure safety. Remove any items from the freezer compartment. Locate the ice breaker assembly in the freezer. Remove the old ice breaker by unscrewing or unclipping it. Install the new ice breaker by following the manufacturer's instructions. Secure the new ice breaker in place. Plug the refrigerator back in and test the ice maker to ensure it is working properly.


What is the purpose of a circuit breaker for a refrigerator and how does it help protect the appliance from electrical damage?

A circuit breaker for a refrigerator is designed to protect the appliance from electrical damage by interrupting the flow of electricity when there is a power surge or overload. This helps prevent overheating and potential fires, ensuring the safe operation of the refrigerator.


What size breaker for?

For a standard size refrigerator, a dedicated 15 amp circuit is used.


Why does my refrigerator keep tripping the breaker?

The most likely possibility is the refrigerator has a problem and needs to be fixed. Another possibility is the refrigerator is on a circuit that does not have enough current capacity to operate it and other appliances that are on the same circuit.


What network does skinny use?

They use their own network, Skinny Network.


What would cause a refrigerator to overload the circuit breaker?

An overloaded circuit breaker for a refrigerator can be caused by multiple factors, such as a malfunctioning compressor drawing more current than normal, a damaged power cord or outlet, or a short circuit within the refrigerator's electrical components. It is important to have a qualified technician inspect the refrigerator to identify and address the specific cause of the overloading.