No, MR11 and MR16 lamps have different base types and dimensions. MR11 lamps have a smaller diameter and different pin configuration compared to MR16 lamps, so they are not interchangeable. Make sure to use the correct lamp size and type for your lighting fixture to ensure proper fit and performance.
No, you cannot replace a 125w mercury vapor lamp with an 80w lamp without changing the control gear. Control gear needs to match the wattage of the lamp to ensure proper operation and to avoid any damage or safety issues. It is essential to use the correct wattage lamp specified for the control gear being used.
No, it is not recommended to use a 70 watt metal halide lamp with a 150 watt ballast. The lamp and ballast wattage should match to ensure proper operation and to prevent damage to the lamp or ballast. It is best to use a compatible lamp and ballast with matching wattages.
No, it is not recommended to use a mercury lamp in a metal halide ballast. Mercury lamps and metal halide lamps have different operating characteristics and using them interchangeably can result in poor performance, reduced lamp life, and potential safety hazards. It is important to use the correct type of lamp for the corresponding ballast.
For a heat lamp, it is recommended to use a ceramic fuse rated for the specific voltage and current requirements of the lamp. It's important to match the fuse rating to the electrical specifications of the lamp to ensure safe operation. If you're not sure, consult the lamp's manual or contact the manufacturer for guidance.
One can use a standing lamp anywhere in their home by simply placing it in the desired space and switching it on. It may be a good idea to place a standing lamp close to the wall, which will prevent it from falling.
A Panasonic TV lamp is for projection televisions that have burnt out their bulb already. If you need to replace your TV lamp then you will have to probably get someone to do it for you unless you are comfortable with your technology abilities.
MR16 light bulbs offer several benefits compared to other types of lighting options. They are energy-efficient, have a longer lifespan, provide a focused and directional light output, and are available in a variety of color temperatures. Additionally, MR16 bulbs are compact in size, making them suitable for use in a variety of lighting fixtures.
No, you cannot replace a 125w mercury vapor lamp with an 80w lamp without changing the control gear. Control gear needs to match the wattage of the lamp to ensure proper operation and to avoid any damage or safety issues. It is essential to use the correct wattage lamp specified for the control gear being used.
the uses of lamp is to light us.....
probably to measure a lamp depending on if its a desk lamp or a stand up lamp, if you use a stand up lamp, i would suggest using either feet or inches
The light bulb in a lava lamp can typically last for about 2,000 to 3,000 hours of use. The actual lifespan may vary depending on factors like the quality of the bulb and how often the lamp is used. It's recommended to replace the bulb when it burns out to ensure the lamp continues to work properly.
This is a lamp using alcohol as fuel.
A standard lamp will not use any electricity when it is off.
The alcohol lamp is used for heating.
No you cannot use a standard mr-16 12volt bulb as it will short right when you turn it on. They do sell them but you have to look up 120V mr-16 JCDR or JCDR-C.
Rear projection TVs are powered by a high-luminosity lamp. This lamp shines light through an LCD screen, creating an image on a rear-projection TV screen. Many TV lamps have a limited lifespan, requiring replacement after several thousand hours of use. When replacing a TV lamp, find the model that works for a certain TV brand. After purchase, locate the access panel on the back of the TV. Remove the old lamp, and clear the area of all dust. A great way to clear dust is with a vacuum cleaner or compressed air. Install the new lamp, and replace the TV panel.
No you can't. You can use a metal halide lamp of the exact wattage of the original mercury lamp. You cannot vary on wattage at all.