answersLogoWhite

0

No. I wouldn't try it. Check on the number of amps that the stove uses. Then you can calculate what size wire you will need. The amp rating on a #12 wire is 20 amps. A 240 volt stove needs a minimum of 40 amps. This supply is brought to the stove on a #8 wire rated at 45 amps R90 insulation. This supply wire is protected by a two pole 40 circuit breaker situated in your electrical panel. If you use a #12 wire and apply the total stove load, the insulation will melt off the wire and short out.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

When the green wire to a 220 stove cord is not in use does it have to be capped or can it be left exposed?

The ground wire must all ways be used. This is your first line of defence if a short circuit occurs. It is the current return path that trips the breaker and disconnects the load from the main service panel. The green wire on a stove cord, at the stove end, must be connected to the frame structure of the stove. Look for a ground lug or ground screw to connect to. If you can not see one, pick up one at a local DIY store and install it. Safety first.


What gauge wire and amp breaker do you use on a stove dryer and hot water heater?

For a stove, use a 8 or 6 gauge wire with a 40 to 50 amp breaker. For a dryer, use a 10 or 8 gauge wire with a 30 amp breaker. For a hot water heater, use a 10 or 8 gauge wire with a 30 or 40 amp breaker. Be sure to consult local electrical codes and guidelines for specific requirements.


What kind and type wire can be used to wire an electric cook stove?

A 8 or 10 gauge copper wire is typically used to wire an electric cook stove. Make sure to use a wire that is rated for the amperage of the stove to ensure safe operation. It is recommended to consult a professional electrician for proper installation.


Is it legal to use aluminum wire for a stove or dryer in Florida?

aluminum wire violates code for any use anywhere in US. If this is true, why would aluminum wire be sold? I know it is used for service entrance.


Can you use uf 12-2 wg wire for 220 volt?

Yes, you can use UF 12-2 WG wire for a 220-volt circuit, as long as it is properly sized for the amperage of the circuit and within the voltage rating of the wire. Make sure to consult the National Electrical Code (NEC) and local codes to ensure compliance.

Related Questions

When the green wire to a 220 stove cord is not in use does it have to be capped or can it be left exposed?

The ground wire must all ways be used. This is your first line of defence if a short circuit occurs. It is the current return path that trips the breaker and disconnects the load from the main service panel. The green wire on a stove cord, at the stove end, must be connected to the frame structure of the stove. Look for a ground lug or ground screw to connect to. If you can not see one, pick up one at a local DIY store and install it. Safety first.


What gauge wire should be used for an electric stove?

For an electric stove, it is recommended to use a 6-gauge wire to ensure safe and efficient operation.


What type of electrical wire should be used for a stove installation?

For a stove installation, it is recommended to use a 4-wire electrical cable with a gauge of 8 or 6 AWG, depending on the stove's power requirements. This type of wire is designed to handle the high voltage and current needed for a stove and includes a ground wire for safety.


How can I safely install a new wire for my stove?

To safely install a new wire for your stove, first turn off the power to the stove at the circuit breaker. Then, carefully remove the old wire and install the new wire following the manufacturer's instructions. Make sure to use the correct gauge wire for your stove and secure all connections properly. Finally, turn the power back on and test the stove to ensure it is working correctly.


How can I safely install a 220 stove outlet in my kitchen?

To safely install a 220 stove outlet in your kitchen, you should first turn off the power to the area, then run a new circuit from the electrical panel to the location of the outlet. Make sure to use the correct gauge wire and install a dedicated circuit breaker. It is recommended to hire a licensed electrician for this task to ensure it is done correctly and safely.


What wire gauge should be used for an electric stove installation?

For an electric stove installation, it is recommended to use a wire gauge of 8 AWG (American Wire Gauge) for a 40-50 amp circuit or 6 AWG for a 50-60 amp circuit. This will ensure safe and efficient power supply to the stove.


What gauge wire and amp breaker do you use on a stove dryer and hot water heater?

For a stove, use a 8 or 6 gauge wire with a 40 to 50 amp breaker. For a dryer, use a 10 or 8 gauge wire with a 30 amp breaker. For a hot water heater, use a 10 or 8 gauge wire with a 30 or 40 amp breaker. Be sure to consult local electrical codes and guidelines for specific requirements.


What kind and type wire can be used to wire an electric cook stove?

A 8 or 10 gauge copper wire is typically used to wire an electric cook stove. Make sure to use a wire that is rated for the amperage of the stove to ensure safe operation. It is recommended to consult a professional electrician for proper installation.


Is it legal to use aluminum wire for a stove or dryer in Florida?

aluminum wire violates code for any use anywhere in US. If this is true, why would aluminum wire be sold? I know it is used for service entrance.


What size wire do you need for 60 amps 400ft 220 volts?

Use AWG # 3 copper.


Can you use a range 220 for a dryer 220?

The plugs are different. The prongs are straight on one and angled on the other. The wire and breaker are the same. You can either change the outlet or the cord.


How to wire a stove properly?

To wire a stove properly, first turn off the power at the circuit breaker. Connect the wires from the stove to the corresponding terminals on the electrical outlet. Make sure to follow the manufacturer's instructions and use the correct gauge of wire. Double-check all connections before turning the power back on. If you are unsure, it is best to consult a professional electrician for assistance.