Yes, but only use them if absolutely necessary and I would never install more than one set of min-breakers in a service panel. Otherwise you can overload the panel.
Bryant breaker boxes typically use Bryant circuit breakers. It is important to use breakers specifically designed for the Bryant panel, as using incompatible breakers can cause safety hazards. Always consult the manufacturer's guidelines or an electrician for the appropriate breakers to use.
It can be seen to be beneficial to use amber glass instead of regular glass because amber glass has the ability to stop the effects of sunlight by blocking harmful UV rays.
For 220v circuits
Your circuit box should have a label on the door listing compatable breakers. For instance, my American Switch 200 amp panel lists what American Switch breakers are usable on that particular panel, and then it goes on to list other manufacturers whose breakers will work in the panel. Mine can use Frank Adam Type A, FA-D, QP & QPH, Bryant Type BR-D and BD breakers as well as Westinghouse Type QP and Q. I am not sure that I would go with the adage that if it fits use it. Check your Panel Box for the tag listing compatible breakers.
No, when wiring for 220v, you should use a ganged 30A breaker to ensure safe and proper functioning of the circuit. Using two 15A breakers is not recommended as they may not trip simultaneously in an overload situation, potentially causing damage to the circuit or appliances.
Moulded breakers or shunt trip breakers - selection is defined by the current rating requirement.
unleaded
tiny,mini,small.
Use exactly what the manufacture recommends and nothing else.
A mini spatula is very useful in situations where a regular sized spatula is too cumbersome. For example, you can use a mini spatula to get down into a mayo jar and use every bit! Also, even when working with a large spatula, a mini can be helpful to get the bits that the large one misses.
Regular gas should be fine
You use instead of OR
no dip
To replace breakers in an electrical box it is extremely important the replace the breaker with the same wattage. Do not replace a 100 breaker with a 20 breaker is can cause damage.
Yes, just put a tiny amount of salt in if you use regular.
ON?
Yes, circuit breakers can wear out over time due to repeated use and aging of internal components. Regular maintenance and testing can help ensure they continue to function properly.