BTU IS FOR BRITISH THERMAL UNITS, USED TO MEASURE ENERGY OF STOVES ETC. SQUARE FEET IS JUST THAT LENGTH MULTIPLIED BY WIDTH. NOT SOME THING THAT IS CONVERTABLE
2.22kW converts to 7,574.955 BTU/hr
To convert BTUs to kilowatts, divide the number of BTUs by 3412. 650,000 BTUs is equivalent to approximately 190.4 kilowatts.
To convert a watt to BTUs, the factor is 1 kilowatt of power = 3412.1416 BTU/hr3.412 BTUs equal a watt.AnswerYour question is meaningless, as these two units measure different quantities. The watt is the SI unit of measurement of power, whereas the BtU is the Imperial unit of energy. So watts cannot be equated to BtUs.
To convert wet BTUs to dry BTUs, you need to account for the moisture content in the wet BTU measurement. This is done by subtracting the energy associated with the water content from the total wet BTU value. The formula is: Dry BTU = Wet BTU - (Moisture content percentage × Wet BTU). This conversion provides a more accurate representation of the energy content of the fuel without the influence of water.
A BTU is the amount of energy required to raise the temperature of 1 pound of water 1 degree Fahrenheit (F) at or near 39.2 degrees F and 1 atmosphere of pressure. Electric heaters are rated in KW, not BTU's 3413 BTU's = 1 KW-hr. Check the link below for a PDF on water heater sizing.
To convert watts to BTUs (British Thermal Units), you can use the formula: 1 watt is approximately equal to 3.412 BTUs per hour. So, if you have a certain number of watts, you can multiply that by 3.412 to convert it to BTUs per hour.
sqm2
2.22kW converts to 7,574.955 BTU/hr
BTU x 0.000293 = kW-h
To convert BTUs to tons, you can use the conversion factor that 1 ton of cooling is equivalent to 12,000 BTUs per hour. Therefore, 18,000 BTUs divided by 12,000 BTUs per ton equals 1.5 tons. So, 18,000 BTUs is equivalent to 1.5 tons of cooling capacity.
To convert CFH to BTU, you need to use the formula 1 CFH which is equivalent to 1000 BTUs.
To convert a watt to BTUs, the factor is 1 kilowatt of power = 3412.1416 BTU/hr 3.412 BTUs equal a watt. 1200 watt = 4094.4 BTUS you will need to remove about 4100 BTU/hr
It takes approximately 970 BTUs to convert one pound of water at 212°F (100°C) to steam at the same temperature.
To convert megawatt-hours (MWh) to thousand cubic feet (MCF) of natural gas, you need to know the energy content of the gas. One MCF of natural gas typically contains about 1,000,000 British Thermal Units (BTUs). Since 1 MWh is equal to approximately 3,412,000 BTUs, you can use the formula: MCF = (MWh × 3,412,000 BTUs) / 1,000,000 BTUs/MCF. Thus, the conversion factor is roughly 3.412 MCF per MWh.
To convert BTUs to kilowatts, divide the number of BTUs by 3412. 650,000 BTUs is equivalent to approximately 190.4 kilowatts.
To convert square feet (sqft) to square meters (sqm²), you can use the conversion factor where 1 square foot is approximately 0.092903 square meters. To convert, multiply the area in square feet by this factor: Area in sqm² = Area in sqft × 0.092903. For example, if you have 100 sqft, it would be approximately 9.29 sqm².
To convert 1 pound of ice at 32°F to 1 pound of water at 32°F, you need to supply 144 BTUs. This energy is required to overcome the latent heat of fusion, which is the energy needed to change ice into water without changing its temperature.