0
Describe how you will attempt to recover pure common salt from a mixture of sand common salt and ammonium chloride?
To recover pure common salt from a mixture of sand, common salt, and ammonium chloride, I would first dissolve the mixture in water, allowing the common salt and ammonium chloride to dissolve while the sand remains insoluble. Next, I would filter the solution to separate the sand from the salt solution. Then, I would gently heat the salt solution to evaporate the water, leaving behind pure common salt as a solid residue. The remaining ammonium chloride can be removed by sublimation if needed, but this step is optional depending on the desired purity.
What else can I help you with?
How can you separate a mixture of iodine ammonium chloride and sand?
Add sufficient water to dissolve the ammonium chloride. Neither the iodine nor the sand will dissolve.Filter out the solids.Evaporate the ammonium chloride from the solution.Heat the solids gently in a retort to sublimate the iodine and recover it.
How can we separate naphthalene from sand?
One way is to dissolve the ammonium chloride in water, then recover the ammonium chloride by evaporation; the naphthalene will not dissolve in water in any substantial quantity.
Is barium sulfate a solid?
Ammonium Chloride sublimes when heated whereas Barium Sulfate does not. Another method would be to add de-ionized water to the mixture. The solids left over will be the Barium Sulfate whereas the the Ammonium Chloride will be mixed with the de-ionized water. Weigh everything first, including the water because the Ammonium Chloride will sublime when dry if you try to evaporate the de-ionized water from the mixture.
How do magnesium and chloride combine to forn magnesium chloride?
When the mixture is heated the Ammonium Chloride(NH4Cl)fumes get separated, leaving the Magnesium Sulfate(MgSO4)behind. Be careful Ammonium Chloride sublimes or sometimes decomposes into poisonous gases Hydrogen Chloride(HCl) and Ammonia(NH3)
Why salt is a heterogeneous mixture and why?
Salt is a homogeneous mixture, not a heterogeneous mixture. This is because salt consists of sodium chloride (NaCl) molecules that are uniformly distributed throughout the mixture, giving it a consistent composition, properties, and appearance.
How do you separate ammonium chloride from a mixture of ammonium chloride and potassium chloride?
To separate ammonium chloride from a mixture of ammonium chloride and potassium chloride, you can use the process of sublimation. Ammonium chloride sublimes at a lower temperature compared to potassium chloride. By heating the mixture, the ammonium chloride will directly change from a solid to a gas, leaving behind the potassium chloride. The resulting gas can be condensed back into solid form for collection.
What is an ammonium chloride and sodium chloride mixture?
a mixture of ammonium chloride and sodium chloride is a mixture of the both. both being chlorides cannot chemically react with other. So they can only be physically mixed.
What is the process of separating ammonium chloride from ammonium chloride and sodium chloride?
To separate ammonium chloride from a mixture of ammonium chloride and sodium chloride, you can dissolve the mixture in water to form a solution. Then, heat the solution to evaporate the water, leaving behind solid ammonium chloride due to its lower melting point compared to sodium chloride. This process is known as crystallization.
How can you separate a mixture of ammonium chloride and potassium chloride?
A mixture of ammonium chloride and potassium chloride can be separated using the process of sublimation. You must also note that both these substances are sublimable. Well this technique is quite feasible in this case as the sublimable temperatures of ammonium and potassium chloride differ widely. Between the two, ammonium chloride has lower sublimable temperature. Therefore, it sublimes first followed by potassium chloride.
How do you separate ammonium chloride and common salt?
Heating the mixture ammonium chloride is decomposed after 315 oC.
How can you separate a mixture of naphthalene and ammonium chloride?
One way is to slurry the solid mixture with water. The ammonium chloride will dissolve and the naphthalene will not. Ammonium chloride can then be recovered by evaporating the water solution of it that is formed.
How to separate a mixture of sodium chloride and ammonium chloride?
Sodium chloride and ammonium chloride can be separated either by sublimation or filtration or crystallization. Sublimation can be found on this site ------------ http://www.lenntech.com/Chemistry/sublimation.htm. I personally think that this method is the easiest.
How can you separate ammonium chloride and copper oxide?
Ammonium chloride is water-soluble whereas copper oxide is not. You can separate them by dissolving the mixture in water, then filtering it. The filtrate solution will contain ammonium chloride and the residue will contain copper oxide.
Is ammonium chloride an element compound or mixture?
Ammonium chloride is a compound, as it is composed of two different elements, ammonium and chloride, combined in a fixed ratio through chemical bonding.
How do you separate Ammonium chloride from a mixture containing sodium chloride and ammonium chloride?
The secret to separating any mixture is to find a property in which the mixed substances differ. For instance, sodium choride (NaCl)is very soluble in water; whereas, ammonium chloride (NH4Cl) is not. By putting the mixture of NaCl and NH4Cl in water (enough to dissolve all of the NaCl, but not enough to dissolve the NH4Cl), the NaCl will dissolve, and the solid left behind is ammonium chloride.
Separating a mixture of iodine ammonim chloride and barium chloride?
first add water to mixture the ammonium chloride and barium chloride dissolve in the water but the iodine does not. filter out the iodine using filtration then use fractional crystallization to separate the ammonium chloride and barium chloride and water
How can you separate a mixture of ammonium chloride and salt?
By the process of sublimation.
