I assume you mean Voltage, Current and Resistance.
Voltage (E)or electromagnetic force is the electrical pressure or force that forces the electrons through any given circuit
Current (I)is the flow of those electrons through any given circuit
Resistance (R) is anything within the circuit that would restrict the flow of electrons
Electric current has no parts. It's as smooth and continuous as honey, and it flows like water ... until you zoom in and examine it at a scale so small that nobody has ever seen it or ever will. On that scale, you find that electrical current is a flow of electrons, each one so small that it takes 31,119,162,280,000,000,000,000,000,000 of them to weigh one ounce, and that 6,250,000,000,000,000,000 of them must flow into the wire every second in order to register a current of 1 Ampere.
The three main parts of a cable are the conductor, which carries the electrical current; the insulation, which encases the conductor to prevent electrical leakage; and the sheath, which provides protection and durability to the overall cable structure.
An electrical shock hazard is defined as a potential danger to a person's health or safety caused by contact with an electrical energy source. This can occur when a person comes into contact with live electrical parts, leading to the flow of electric current through the body, resulting in injury or even death. Electrical shock hazards can vary in severity depending on the level of voltage and current involved.
Yes, shocks can occur when current flows through parts of the human body. This can happen if a person comes into contact with an electrical source, such as a faulty appliance or exposed wires. The severity of the shock depends on the amount of current and duration of exposure.
Electrical testers work by measuring voltage, current, or resistance in an electrical circuit. They typically come in the form of a handheld device with probes that are used to make contact with different parts of the circuit to provide readings. The tester uses internal components such as a display screen, sensors, and circuitry to detect and measure the electrical values.
battery and a switch
Electric current has no parts. It's as smooth and continuous as honey, and it flows like water ... until you zoom in and examine it at a scale so small that nobody has ever seen it or ever will. On that scale, you find that electrical current is a flow of electrons, each one so small that it takes 31,119,162,280,000,000,000,000,000,000 of them to weigh one ounce, and that 6,250,000,000,000,000,000 of them must flow into the wire every second in order to register a current of 1 Ampere.
Rectifiers are electrical parts, all electrical parts are rated for 3 things. 1) voltage 2) current 3) temperature Exceed any of these things and the electrical part will fail.
Current or "electrical current" (to distinguish it from current in a river) is the flow of electrons in a wire which can perform useful work. The current can be generated by a battery or a generator, or by other means. Current electricity is not a commonly used term. "Current electricity" is the science of electric currents, and it means the same thing as Electrodynamics. Example: the Electrical Sciences can be divided into two parts: Static Electricity or Electrostatics, and Current Electricity or Electrodynamics.
Lightning is an electrical current that starts in clouds due to differences in electrical charges between parts of the clouds.
Two ratios that describe the same relationship are 1:2 and 2:4. Both ratios represent the same proportional relationship, as they can be simplified to the same fraction (1/2). This means that for every 1 part of one quantity, there are 2 parts of another, and for every 2 parts of the first quantity, there are 4 parts of the second. Thus, they convey the same comparative relationship between the two quantities.
To facilitate the conveyance of electrical current and/or signals between the static and rotating parts of a device.
The three main parts of a cable are the conductor, which carries the electrical current; the insulation, which encases the conductor to prevent electrical leakage; and the sheath, which provides protection and durability to the overall cable structure.
The word "electrocardiogram" can be divided into its component parts as follows: "electro-" refers to electricity or electrical activity, "cardio-" pertains to the heart, and "-gram" indicates a recording or a written record. Together, these parts describe a recording of the electrical activity of the heart.
Equivalent series resistance (ESR) is an effective resistance that is used to describe the resistive parts of the impedance of certain electrical components.
A flow of electrons is needed to have a current. And there (usually) must be a complete circuit. And you need a voltage to make the current move around your circuit. All tied up in Ohms Law - which I'll leave to you.
"erodieren" is to "erode", "Tisch" is "table" and "kopf" is "head".These must be parts of an "Electrical Discharge Machine (EDM)" which removes or alters the surface of a material using electrical current.