the short the tube the faster the blood can get to the other side
Viscosity is constant to the flow of the fluid.
Fluid ounce is an old-fashioned unit, used to measure volume, or capacity.
Yes, there is a relationship between the flow rate of a fluid and the amount that remains behind, often described by principles of fluid dynamics. Generally, a higher flow rate can lead to less fluid remaining in a given area, as more fluid is displaced or transported away quickly. However, factors like viscosity, pressure, and the geometry of the system also play crucial roles in determining how much fluid stays behind. Therefore, while a quicker flow typically results in less fluid remaining, the specific relationship can depend on various conditions.
This question cannot be answered in a sensible way. A millimetre is a measure of length, with dimensions [L]. A fluid ounce is a measure of volume, with dimensions [L3]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.
A fluid ounce is a measurement of volume, while meters measure length. The two units are not directly convertible.
In a fluid system, the flow rate is inversely proportional to the pipe length. This means that as the pipe length increases, the flow rate decreases, and vice versa.
Yeast is the relationship with capacity and fluid ounces
The relationship between fluid density and pressure can be described by the hydrostatic equation, which states that pressure in a fluid increases with increasing fluid density. This relationship is important in understanding how pressure changes with depth in a fluid column, such as in the ocean or in a container.
There are 16 fluid ounces to one pint.
The relationship between velocity and pressure in a fluid is described by Bernoulli's principle, which states that when the velocity of a fluid increases, the pressure decreases and vice versa. This relationship is based on the conservation of energy in a flow system.
Bernoulli's principle describes the relationship between the pressure, velocity, and height of a fluid in motion. It states that as the velocity of a fluid increases, its pressure decreases, and vice versa.
The relationship between mass density and buoyancy of an object in a fluid is that the buoyant force acting on an object is determined by the difference in density between the object and the fluid it is immersed in. If the object is less dense than the fluid, it will float; if it is more dense, it will sink.
You are mixing up types of measurements. Inches is a unit of length and ounces is a unit of weight or volume (fluid ounces). There is no direct relationship between the two.
In a fluid, the velocity and pressure are related by Bernoulli's principle, which states that as the velocity of a fluid increases, its pressure decreases, and vice versa. This relationship is often seen in applications such as fluid dynamics and aerodynamics.
Archimedes.
The pressure exerted by a fluid increases with depth due to the weight of the fluid above pushing down. This relationship is described by the hydrostatic pressure formula, which states that pressure is directly proportional to the depth of the fluid and the density of the fluid.
In a fluid system, the relationship between pipe diameter, pressure, and flow is governed by the principles of fluid dynamics. A larger pipe diameter allows for higher flow rates at lower pressures, while a smaller diameter results in higher pressures needed to achieve the same flow rate. This is known as the relationship between pressure drop and flow rate in a fluid system.