No, 1000VA does not necessarily equal 10 amps. The relationship between VA (volt-amperes) and amps depends on the power factor of the load. For a purely resistive load (like an incandescent light bulb), 1000VA at 120V would be equivalent to approximately 8.3 amps.
For a 1kVA (kilo volt-ampere) load at 120V, the amperage would be approximately 8.33A (1000VA / 120V). This calculation is based on the formula: Amps = VA / Volts.
1 Amps = 1000 miliamps 0.01 Amps = X x= 0.01 X 1000 = 10 miliamps
Power = current * voltage. Multiply your supply voltage by 100.
To calculate amps, you need to know the voltage of the circuit. The formula to convert watts to amps is Amps = Watts / Volts. If the voltage is 120V, then 1200 watts would be equal to 10 amps (1200 watts / 120 volts = 10 amps).
To calculate the amperage in the secondary side of a transformer, you can use the formula: Amps = kVA / (Volts x Sqrt(3)). For a 250 kVA transformer with a 220-volt secondary, the amperage will be approximately 660.4 Amps.
For a 1kVA (kilo volt-ampere) load at 120V, the amperage would be approximately 8.33A (1000VA / 120V). This calculation is based on the formula: Amps = VA / Volts.
1 Amps = 1000 miliamps 0.01 Amps = X x= 0.01 X 1000 = 10 miliamps
Power = current * voltage. Multiply your supply voltage by 100.
To calculate amps, you need to know the voltage of the circuit. The formula to convert watts to amps is Amps = Watts / Volts. If the voltage is 120V, then 1200 watts would be equal to 10 amps (1200 watts / 120 volts = 10 amps).
its equal to 1 Amps 6.25 x 10 to the 18th power
To calculate the amperage in the secondary side of a transformer, you can use the formula: Amps = kVA / (Volts x Sqrt(3)). For a 250 kVA transformer with a 220-volt secondary, the amperage will be approximately 660.4 Amps.
1.3 amps
50 milliamps (mA) is equal to 0.05 amps.
Small generators are sized in watts. Watts is the product of amps times volts. To properly answer this question a voltage for your 10 amps must be stated. That said small generator outputs are usually 120/240 volts in North America. So 10 amps at 120 volts equal 1200 watts. 10 amps at 240 volts equal 2400 watts. A 3000 watt generator will be amply for your 10 amp load.
To calculate the wattage of a device using 10 amps, you would need to know the voltage it operates on. The formula is Watts = Amps x Volts. So, for example, at 120 volts, 10 amps would be equal to 1200 watts.
15 Amps
25 A = 25,000 mA