Yes, hydrogen sulfide (H2S) has a BTU (British Thermal Unit) value, which is a measure of its energy content. The BTU value of H2S is approximately 300 BTU per cubic foot at standard conditions. This makes it a combustible gas, although it is primarily known for its toxic properties rather than its energy content.
No, the BTU (British Thermal Unit) value of gasoline does not increase if the temperature decreases. The BTU value of gasoline is a measure of its energy content and is not affected by temperature changes.
To determine the initial pressure of H2S gas in the flask, we need the total pressure and the partial pressure of another gas in equilibrium with H2S. Without the partial pressure of the other gas, we can't determine the initial pressure of H2S with just the Kp value and temperature provided.
Propylene has a lower heating value of approximately 21,500 BTU per gallon.
To convert wet BTUs to dry BTUs, you need to account for the moisture content in the wet BTU measurement. This is done by subtracting the energy associated with the water content from the total wet BTU value. The formula is: Dry BTU = Wet BTU - (Moisture content percentage × Wet BTU). This conversion provides a more accurate representation of the energy content of the fuel without the influence of water.
It is known as hydrosulfuric acid. Not to be confused with sulfuric acid which is H2SO4
The lower heating value of hydrogen sulfide (H2S) is around 14,700 BTU/lb. This value represents the amount of heat released when one pound of H2S is burned completely in oxygen at constant pressure with the products cooled to 150 degrees Fahrenheit.
The pH of a solution containing H2S would be acidic, as H2S is a weak acid. The exact pH value would depend on the concentration of H2S in the solution.
No, the BTU (British Thermal Unit) value of gasoline does not increase if the temperature decreases. The BTU value of gasoline is a measure of its energy content and is not affected by temperature changes.
To determine the initial pressure of H2S gas in the flask, we need the total pressure and the partial pressure of another gas in equilibrium with H2S. Without the partial pressure of the other gas, we can't determine the initial pressure of H2S with just the Kp value and temperature provided.
btu per pound * pounds per gallon OK, it sounds as if you know the value of fuel in oil btu per pound.Now find out how much a gallon of fuel oil weighs and multiply the btu value x that weight in pounds and that is the value per gallon. Or simply, diesel fuel is #2 fuel oil which contains 140,000 btu per gallon.
The permeability value for hydrogen sulfide (H2S) can vary depending on the material it is passing through. Generally, H2S has low permeability in most materials due to its small molecular size and polar nature. Polymer materials with high permeability to gases like silicone rubber are more likely to allow the passage of H2S.
The average heating value of heating oil is around 138,500 Btu per gallon. Since there are approximately 3.785 liters in a gallon, one liter of heating oil would contain about 36,600 Btu.
Heptane has the chemical formula of C7H16. It has a BTU rating of 19,163 BTU per pound and a rating of 4,465.8 kilojoules per mole.
Propylene has a lower heating value of approximately 21,500 BTU per gallon.
10000
To convert joules to British thermal units (Btu), you can use the conversion factor: 1 joule is equal to 0.000947817 Btu. Therefore, 57281 joules is equivalent to 57.81 Btu.
To convert 3.6 kW to BTU (British Thermal Units), multiply the kilowatt value by 3412.142. Therefore, 3.6 kW is equivalent to approximately 12280.91 BTU.