0
When you perform an electrolysis on water, you get NaOH which is a dangerous base; and something with Chlorine( I've tried it myself and you get a gas that stinks enormously ) but As seen as there are equal atoms of Na and Cl (NaCl) you should get the same amount of those elements after the electrolysis.
Mind that you have 2 substances; H2O and NaCl (So you'll NOT get the elements by their own but NaOH and (I might be wrong with this (HCl ? (i doubt that ))
And also important; be careful whiles using water and electricity and make sure you don't use a too high voltage on them (low Ampere)
LB
What else can I help you with?
Can you take water and separate it into hydrogen and oxygen again?
Yes, with electrolysis.
Can electrolysis taken place by distilled water?
No because for electrolysis to take place, an electrolyte or ions like table salt ( NaCl ) is needed. But in distilled water there are no ions or electrolytes. Hence electrolysis cannot take place in distilled water. - Dumnledore
Why electrolysis does not take place in distilled water?
Electrolysis requires ions in water to conduct electricity. Distilled water lacks ions, so it has very low conductivity and does not support electrolysis. Adding a small amount of electrolyte (such as salt) to distilled water increases its conductivity, enabling electrolysis to occur.
What reaction is from am example of breaking down water through electrolysis requires an input of energy?
Electrolysis of water involves the decomposition of water (H₂O) into hydrogen (H₂) and oxygen (O₂) gases using an electric current. The reaction can be represented as 2H₂O(l) → 2H₂(g) + O₂(g). This process requires an input of energy to overcome the activation energy barrier, allowing the molecules to break apart. Thus, electrolysis exemplifies a reaction that necessitates energy input to proceed.
When adding electric energy to water molecules can it cause the bonds between Hydrogen and oxygen to break?
Yes, adding electric energy to water molecules can cause the bonds between hydrogen and oxygen to break through a process called electrolysis. In electrolysis, an electric current is passed through water, which results in the splitting of water molecules into hydrogen and oxygen gas. This occurs when the energy supplied is sufficient to overcome the bond energy of the H-O bonds in water.
During water electrolysis does the water have to be warm?
No, water does not have to be warm for electrolysis to occur. However, increasing the temperature can help improve the efficiency of the process by reducing the energy required for the reaction to take place.
Kind of energy in electrolysis of water?
Electrical energy is required to electrolyse water.
What type of energy does electrolysis use?
Electrolysis uses electrical energy to break down water or other substances into their constituent elements through the process of electrolysis.
What is the main energy conversion occurs in electrolysis of water?
The main energy conversion in the electrolysis of water is converting electrical energy (from an external power source) into chemical energy to break down water molecules into hydrogen and oxygen gases.
What are the products when water is broken down by electrolysis?
The two products when water is broken down by electrolysis is hydrogen gas and oxygen gas. The energy source in photosynthesis is light energy.
In what compuonds is oxygen found and how is it extracted?
Oxygen can be found in H20 (water). It can be separated through electrolysis The equation for the electrolysis of water is 2[H20]+energy = 2[H2] + 02
Can you take water and separate it into hydrogen and oxygen again?
Yes, with electrolysis.
How can water be used as electrical energy?
There is no useable electrical energy in water. But if by electrolysis the water can be split into separate hydrogen and oxygen components which are collected separately, the hydrogen can be burnt as a fuel. When the hydrogen is burnt, no more energy is produced than what went into the original electrolysis, so the water is not a source of energy, it is more of a way to store energy. Moving water can be used to generate electricity, in hydroelectric schemes and in tidal and wave generators.
Why electrolysis does not take place in distilled water?
Electrolysis requires ions in water to conduct electricity. Distilled water lacks ions, so it has very low conductivity and does not support electrolysis. Adding a small amount of electrolyte (such as salt) to distilled water increases its conductivity, enabling electrolysis to occur.
Can electrolysis taken place by distilled water?
No because for electrolysis to take place, an electrolyte or ions like table salt ( NaCl ) is needed. But in distilled water there are no ions or electrolytes. Hence electrolysis cannot take place in distilled water. - Dumnledore
What kind of energy is used when water decomposes?
To separate water into hydrogen and oxygen, electrolysis is usually used; this uses electrical energy. Of course, the electrical energy can be generated in any of several ways.
What role does an electrolysis catalyst play in the process of converting water into hydrogen and oxygen?
An electrolysis catalyst helps to speed up the chemical reaction that breaks down water into hydrogen and oxygen during the electrolysis process. It lowers the energy input needed for the reaction to occur, making the process more efficient.
