0
What else can I help you with?
What is the advantage in making an alloy by mixing the elements as powders then heating them?
We can avoid high temperatures and save energy; but generally sintering occur at some temperature - of course under the melting point of the alloying elements.
What is it called when both aluminum and copper can be used for making wire?
an alloy
Is ordinairy nails an alloy?
Normally nails aren't made of an alloy however they are galvanized, this means they have a coating of a less reactive metal such as Zinc as to prevent rusting of the nails. Nails are normally made out of iron.
Which alloy is used in making accurate laboratory balances?
The most common alloy used in making accurate laboratory balances is stainless steel. Stainless steel offers high precision and resistance to corrosion, making it an ideal material for maintaining accuracy in laboratory measurements.
What element is mixed with steel?
Almost any metal might be included in a steel alloy. The simplest alloy that is called steel is an alloy of just iron and carbon. But it is the ratio that is important (e.g. cast iron is also an alloy of just iron and carbon, but it has too much carbon making it too brittle to be steel). There are also a few nonmetals (e.g. boron, silicon) that might be included in a steel alloy.
Is Making an alloy physical or chemical change?
Making an alloy is a physical change. An alloy is a mixture of metals.
What alloy cab e use instead of aluminium alloy?
titanium
What is the advantage of using Alloy wheels compare to ordinary steel wheels?
Alloy wheels give much stability on cornering.They are light in weight and are having high strength.They are having better tolerance, appearance and can withstand the vibrations and shocks.They are having good heat dissipation.And they look good and trendy.
What is the advantage of alloy have over pure metal?
its stronger and is expands
What is the advantage in making an alloy by mixing the elements as powders and the heating them?
This, coming from my mind purely, and no sources, is probably because when you mix powders well, they become more evenly spread, so when melted, there will be a uniform amount of each metal everywhere in the alloy. This means If I take two chunks of the alloy, there should be the same amount of copper in each chunk.
What is the advantage in making an alloy by mixing the elements as powders then heating them?
We can avoid high temperatures and save energy; but generally sintering occur at some temperature - of course under the melting point of the alloying elements.
Is an alloy of aluminum has a melting range instead of a melting point is the alloy a compound?
It is a compound. All pure elements have a certain exact melting point.
What is it called when both aluminum and copper can be used for making wire?
an alloy
What is an advantage of using alloy instead of pure iron?
Iron as an alloy is stronger and has a higher melting point. It can also be made to be much more resistant to rust (the most resistant alloy being stainless steel). Hence it is preferred to pure iron.Pure iron is quite brittle and very susceptible to rust. Iron alloys maintain the strength of iron and make it more malleable (less brittle) and can also make the alloy resistent to rust.
What metal used for key chain making?
Stainless steel is an adequate alloy.
How ordinary iron become stainless steel?
By adding other metals like chrome and nickel to the mix. the resulting alloy is the strongly corrosion resistant.
Is ordinairy nails an alloy?
Normally nails aren't made of an alloy however they are galvanized, this means they have a coating of a less reactive metal such as Zinc as to prevent rusting of the nails. Nails are normally made out of iron.
