The ground wire is NEVER used to provide a reference to create 110v for the controls of the dryer. That is the job of the neutral wire and why dryers are fed with a three wire cable. With the loss of the neutral the dryer would not start as it needs the 120 volts to bring the heating contactor and the motor contactor into activation.
In many cases, the ground wire is used to provide a reference to create 110v for the controls of the dryer. With the loss of the ground, the dryer's control circuitry 'floated' as high as 220/240 volts.
Usually, the small electric motor that drives the control knob can not handle these voltages, also the control contacts and any additional coils will burn up as well.
There could be extensive damage, and may not be worth repairing the dryer.
The energy source which Is dug out of the ground is called coal and is can be burnt to make electricity
It is unlikely to get an electric shock from touching a standard radiator as they are usually not electrically charged. However, if a radiator is being used improperly or has a fault in its electrical connection, there is a possibility of getting an electric shock. It's always best to have electrical systems checked by a qualified professional to ensure safety.
When burned, potassium produces a lilac or light purple flame, while calcium produces an orange-red flame. These distinct colors can be used to identify the presence of these elements in a flame test. The differing colors are due to the specific wavelengths of light emitted when the excited electrons in these elements return to their ground state.
Nothing will happen if the neutral and ground wire is shorted. The electrical code makes it mandatory that the neutral and ground are brought together at a common point within the distribution panel. On a 120/240 volt distribution system the ground wire is terminated at the point where the service neutral terminated in the distribution panel. It is usually a double lug the neutral wire connecting into one hole and the ground wire connecting into the other hole. Through this lug assembly there is a machine screw that is inserted through the lug assembly and it screws into the metallic enclosure of the distribution panel. This action bonds the metal enclosure, neutral wire and ground wire bringing the point to a common potential of zero.
Natural gas is burned in a power plant to heat water and create steam. The steam turns a turbine connected to a generator, which produces electricity. This process is combustion-based and releases emissions such as carbon dioxide into the atmosphere.
Atlanta.
they were burned to the ground
it was burned to the ground
Yes, because of the ashes.
it was burned to the ground
it was burned to the ground
it was burned to the ground
Xerxes/The persians
General Sherman
in 2010, all of America burned to the ground.
its called CAUGHT ON FIRE AND BURNED TO THE GROUND
Atlanta and Richmond were the two major confederate cities which were nearly burned to the ground late in the Civil War.