Salt water toilets on boats and ships use seawater to flush waste instead of fresh water. The seawater is pumped into the toilet bowl to flush away waste, which then gets discharged overboard. This system helps conserve fresh water on the vessel.
Salt water is not used in toilets because it can cause corrosion and damage to the plumbing system. Additionally, salt water is not as effective in breaking down waste compared to fresh water.
Rock salt can be used to help prevent sewer lines from freezing during the winter by pouring it down drains or toilets. The salt will lower the freezing point of water in the pipes, helping to prevent blockages. It is important to use rock salt sparingly and to flush the pipes with water afterwards to prevent buildup.
Boats cannot sail on the Dead Sea because the water is extremely dense with salt, making it more buoyant than traditional bodies of water. As a result, boats would not be able to create enough displacement to navigate the waters of the Dead Sea.
Rock salt may help with slow toilets by breaking down minor clogs due to its abrasive nature. However, it may not be the most effective solution for persistent or severe clogs. It's generally recommended to use a plunger or a chemical drain cleaner specifically designed for toilets.
The Plimsoll line in fresh water marks the maximum point to which a ship can be loaded safely without sinking. In salt water, the same principle applies, but the Plimsoll line will be slightly lower due to the higher density of salt water compared to fresh water. This ensures that ships are loaded appropriately for different water conditions to maintain stability and safety.
Ships, boats, anything buoyant, really...
Salt water is not used in toilets because it can cause corrosion and damage to the plumbing system. Additionally, salt water is not as effective in breaking down waste compared to fresh water.
Yes, salt water is denser than fresh water so boats float higher in salt water.
Because salt water is very corrosive and so all the moving metal parts would have to be specially treated.
Boats and ships can be made of just about anything as long as the vessel has an average density less than water and does not immediately dissolve (e.g. salt, paper pulp). Most modern ships are made of steel or aluminum. Boats are made of metal, wood, plastic, or fiberglass. The earliest boats were made of logs or woven reeds.
It is because the fresh water has less density compared to that of salt water.
Humans cam survive for about 3 days with out fresh water. Fresh water is brought on ships for this reason because distilling salt water on a ship is difficult.
The floating or sinking of an object depends on the upthrust force the water exerts on the object. By Archmides' principle, Upthrust Force = (Density of Liquid) * (Volume of Liquid Displaced by the object) therefore the upthrust force depends on the density of the liquid, and as salt water has a larger density than fresh water, boats should float better on salt water.
At the heads with buckets of salt water
Ships sink more in fresh water than in salt water because fresh water is less dense than salt water. This means that a ship will displace less water in fresh water compared to salt water, leading to less buoyancy and a higher likelihood of sinking. Additionally, fresh water lacks the buoyant force provided by dissolved salts in salt water.
water is the ground for ships ,and the salt water is the best conductor and it acts as a zero potential(like for us ground as) for ships.
flotation is due to the fact the boat is less dense than the water, salty water is more dense than normal water. Consequently things can be heavier or more dense and still be less dense than water aka they float.