0
How can I swag a cathedral ceiling fixture to the wall the ceiling stud is too far away and the fixture is too heavy and no attic access?
You can supply the voltage to the swag from a wall box but the whole purpose of a swag fixture is to have it hang from the ceiling.You are going to have to find a way to support the fixture. If you can not get support from behind the ceiling then the support is going to have to be on the exposed surface side that you can see. You will probably have to span two ceiling joists and hang the fixture some where in between them to suit your purposes.
What else can I help you with?
How do you install a winnower ceiling fan?
It is really easy to install a solar attic fan. You will get plenty of information on installing solar attic fan on internet. When I bought my solar attic fan, I wanted to install it by myself. I confess, I am not a handy man kind of guy. It took me more than 1 hour to install one on my roof. While I was on the internet searching installation guide, I came upon this website, they have step by step installation guide. I recommend that you follow the manufacturer guideline with this step by step guide and your attic fan will be installed before you know it.
Can you convert an existing flush mount ceiling light into a recessed light?
Sure. Get a recessed light that is designed to be installed in "old Work". You must hav eenough room in ceiling to contain the recessed light. There may be some issues in some locations where the recessed fixture may overheat if for instance there is insulation around the fixture. Light should have an over temp cutoff. There should be a template with recessed light and a built in box to wire in the power from the old light. If you carefully cut out the sheetrock in ceiling according to the template dimensions, you will be able to use the piece you remove to repair the hole should there be no room for the recessed light. If there is attic access where the new light will be installed, you may be able to use a "new Work" light fixture since you can mount it from above. Go to someplace like Home Depot or Lowes and see what they have available.
How do you install lighting in ceilings with insulation?
Assume you are asking about recessed lighting. There are units that have a can around where the bulb is located to keep insulation a safe distance from the heat generated by the bulb. Just cut away the insulation so the can will fit. Buy a fixture that has thermal protection and will cut off if the fixture gets too hot. Follow manufacturer's recommended installation procedures. <<>> Don't leave your ceiling vapour barrier with a break in it. At the place where you buy your fixtures ask for a vapour barrier plastic boot to go over the fixture to seal the existing barrier. The easiest method to install this boot is from the top side in the attic if possible. Make sure that you use vapour barrier adhesive tape to seal the existing barrier to the new fixture boot.
What type of light fixtures creates compromises in the heated envelope of the house?
Exterior light fixtures can be a big problem because they may penetrate the air barrier, which compromises the heated envelope of the light house. However, the worst fixture is a recessed light that penetrates an attic.
Why do your recessed kitchen lights go out intermittently?
Recessed lights or "can lights" have thermal protection for safety that cuts the power to a light fixture if it heats to a set temperature. Obviously, this is to protect the fixture and more importantly, to prevent a fire in the attic. Check for insulation of other material directly above and around the affected light to make sure it has the proper clearance.
What are the common features to consider when choosing a ceiling attic door for your home?
When choosing a ceiling attic door for your home, consider features such as size, material, insulation, ease of access, and security. These factors can impact the functionality and efficiency of your attic access.
What do you charge for installing a ceiling fan with no attic access?
give more details like the area etc
What are some common issues to consider when renovating an attic ceiling?
When renovating an attic ceiling, common issues to consider include structural integrity, insulation, ventilation, lighting, and access points. It is important to ensure that the ceiling can support any additional weight from renovations, that proper insulation is installed to regulate temperature, that there is adequate ventilation to prevent moisture buildup, that lighting is sufficient for the space, and that there are safe and convenient access points to the attic.
What are some tips for choosing the best attic light fixture for optimal illumination and functionality?
When choosing an attic light fixture for optimal illumination and functionality, consider selecting a fixture that provides sufficient brightness for the space, is energy-efficient, and has a design that complements the attic's layout. Additionally, choose a fixture that is easy to install and maintain, and ensure it meets safety standards for attic use.
How do I investigate a water stain on the ceiling?
Have you access to the floor above it? if you do, try to life some floorboards and see what you can find. If the ceiling is the bottom of the attic, find a way in and check out the pipes. If you can't access floor above, ask whoever lives there to have a look for you.
What room would have an outlet in the ceiling?
attic
How do you fix a plumbing vent pipe?
Plumbing vent pipe is installed through a cathedral ceiling and metal roof surface there is no easy access into the roof cavity. In an attic after cut off the elbow whose female end contained the remains of the ABS pipe, glued on a short extension and new elbow in the attic, and glued a new plumbing vent rooftop riser into the new elbow. For more information visit at: alliedallcityinc.com
Why does attic ceiling pop?
because it's uninsulated
How can I install a bathroom fan without attic access?
Installing a bathroom fan without attic access can be done by using a side venting fan that can be installed through the wall instead of the ceiling. This type of fan can be mounted directly on the exterior wall of the bathroom, allowing for ventilation without the need to access the attic. Be sure to follow the manufacturer's instructions carefully and consider hiring a professional if needed.
How do you install a winnower ceiling fan?
It is really easy to install a solar attic fan. You will get plenty of information on installing solar attic fan on internet. When I bought my solar attic fan, I wanted to install it by myself. I confess, I am not a handy man kind of guy. It took me more than 1 hour to install one on my roof. While I was on the internet searching installation guide, I came upon this website, they have step by step installation guide. I recommend that you follow the manufacturer guideline with this step by step guide and your attic fan will be installed before you know it.
How can I safely and effectively walk in the attic?
To safely and effectively walk in the attic, make sure to wear appropriate footwear with good traction, use a sturdy ladder to access the attic, and walk only on the floor joists to avoid stepping on the ceiling below. Additionally, make sure the attic is well-lit and clear of any obstacles or debris that could cause tripping or falling.
Should I insulate my attic floor or ceiling for better energy efficiency?
Insulating the attic floor is generally more effective for energy efficiency because it helps to keep the living space below at a consistent temperature. Insulating the ceiling can be beneficial in certain situations, such as if the attic is a conditioned living space.
