probably
Pure
By using repeated cycles of fractional crystallization. On each cycle the impurities will concentrate in the brine, leaving purer crystals of salt.
1. Dissolve the copper carbonate/sulfate salts in water and filter it: the Copper Carbonate is insoluble so it will remain as the residue on the filter paper, and the copper sulfate is soluble so it will pass through the paper as the filtrate. 2. Heat the filtrate in an evaporating basin till the point of crystallization (crystals will form on a rod dipped into the mixture, at the point of crystallization). 3. Leave the filtrate to cool and crystals of pure Copper sulfate will form. Collect the crystals with a spatula and leave them on a sheet of filter paper to dry.
If a substance in a mixture is preponderant--, if the amount far exceeds the amounts of the other substances in the mixture it is usually called an impure substance. Resource: Separation of the Components of a Mixture Lab -Chemistry
During recrystallization, impurities are removed as the compound is dissolved and then slowly cooled to allow for the formation of pure crystals. As a result, the melting point of the compound should increase after recrystallization because the presence of impurities lowers the melting point of the compound.
One method to obtain pure copper sulfate from an impure sample is by recrystallization. In this process, the impure sample is dissolved in water, and then the solution is heated and slowly cooled to allow pure copper sulfate crystals to form. These crystals are then filtered out and dried to obtain the pure compound.
The suitable prefix for pure is pure it won't make sense of you put another set of words in front of pure it just would not make
Any chemical may be pure or impure.
Impure common salt can be purified through the process of recrystallization. This involves dissolving the impure salt in water, filtering out any insoluble impurities, and then allowing the solution to cool slowly so that pure salt crystals form. These crystals can then be separated and dried to obtain purified common salt.
pure
Pure
Adding impurities to a pure salt or applying a method of preparation which not lead to a pure salt.
impure
Pure water does not contain colour but impure water contains Other compounds.
Generally an impure material is cheaper than a pure material; the word advantage is not so adequate here - can use pure or impure, this depends on the specific applications.
By using repeated cycles of fractional crystallization. On each cycle the impurities will concentrate in the brine, leaving purer crystals of salt.
By the method of electrolysisCopper is a good conductor of electricity, and is used extensively to make electrical wiring and components. The extraction of copper from copper ore is done by reduction with carbon, but the copper produced is not pure enough for use as a conductor, so it is purefied using electrolysis.