You don't. The receptacles accept different shaped plugs to stop people from doing this. If you did somehow rig it up to fit, you would most definitely damage or destroy the object plugged in.
You cannot plug a 240V appliance directly into a standard 120V outlet as it can cause damage or be a safety hazard. You would need a dedicated 240V outlet and possibly a step-down transformer to safely use the appliance. It's recommended to consult an electrician for proper installation.
If you are talking about the standard cigarette lighter socket in an automobile, you can only use devices that can run on 12 volts DC ((most modern cars) within the rated AMP load capacity. A standard house outlet is designed for 110 volt AC devices that have a 110 volt AC source
Yes, assuming the wall outlet produces 120V 60 Hz at at least 4 watts.
If I understand your question, Can you run a 110 appliance off of a 220 volt outlet? You could by only using one leg of the 220. You may also consider changing the outlet. Put in a regular 110 outlet and capping off one leg of the 220 in the wall box. You still have a neutral and a ground to work with. I read this as the questioner doesn't want to modify the outlet. Check the voltage ratings on the device. Many electronic devices nowadays can havdle 120V or 240V as it is cheaper to manufacture one powersupply and sell it everywhere. If your device is rated for 240V, you can put a 240V plug on it. If it only says 120V, no dice. 240V will burn it up.
A 220 oulet line carries two 110 vold lines and a ground wire. The outlet is shaped differently than the standard household (110) outlet, usually having at least one (plug-in) prong 90 deg to the other, sometines two of the prongs. This type is usually found in a utility room for dryers, most of which use 220 power.
Nominally 110 to 120 volt power strip is okay to connect to a standard outlet.
You cannot plug a 240V appliance directly into a standard 120V outlet as it can cause damage or be a safety hazard. You would need a dedicated 240V outlet and possibly a step-down transformer to safely use the appliance. It's recommended to consult an electrician for proper installation.
no
Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.
A previous member answered: "No. You will need a step up transformer to be able to use 110v appliances in 100v sockets." This is incorrect. In the US, the AC supplied to household outlets may be called 100, 110, 0r 120 Volts. These all refer to the U.S. nominal 110 Volt supply, which can range from as low as 95 volts and as high as 125 volts and most appliances labeled for 110 Volts may be used in the socket. Generally, if the plug fits, it's safe.
NO, unless you get a converter that converts 220 to 110.
Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.
In a United States 110/120V household outlet (also known as an Edison plug) the ground contact is the one shaped like a train tunnel, usually located at the bottom. The hot and neutral wires are the two shaped like slits.
Yes.
15 amps
If you are talking about the standard cigarette lighter socket in an automobile, you can only use devices that can run on 12 volts DC ((most modern cars) within the rated AMP load capacity. A standard house outlet is designed for 110 volt AC devices that have a 110 volt AC source
Yes, assuming the wall outlet produces 120V 60 Hz at at least 4 watts.