0
What else can I help you with?
Is one-half inch drywall actually one-half inch thick?
No, one-half inch drywall is not actually one-half inch thick. It is typically around 0.48 inches thick.
Example of a opaque material?
A half inch thick steel plate, A half inch thick plywood, Brick, Concrete Block
How many square feet of 2 inch thick duct insulation are needed for the outside of a 10 ft section of 8 inch x 20 inch duct work?
53.3
What planet has thick co2?
Venus has extremely thick CO2 with a surface pressure of 93 Earth-atmospheres (about 1400 pounds/square inch) and extreme global warming of 400-500 degrees C.
How thick would acrylic have to be to withstand an internal force of approximately 1200 psi?
To withstand an internal force of 1200 psi, the acrylic would need to be at least 1 inch thick. Acrylic typically has a tensile strength of around 10,000 psi, so a 1-inch thickness would comfortably handle the 1200 psi force.
Is one-half inch drywall actually one-half inch thick?
No, one-half inch drywall is not actually one-half inch thick. It is typically around 0.48 inches thick.
How thick is 31 mil?
how thick is .31 of an inch.
How thick is a kidney?
The kidney 1 inch (1.5 cm) thick.
How thick is a windshield?
About 1 inch
Example of a opaque material?
A half inch thick steel plate, A half inch thick plywood, Brick, Concrete Block
How many thousandths thick is a dime?
A dime is approximately 1.35 millimeters thick. To convert this measurement to thousandths of an inch, you would multiply by 39.37 (since there are 25.4 millimeters in an inch). Therefore, a dime is about 53.15 thousandths of an inch thick.
How thick is 75 mil as a fraction?
- mils are a unit of measure - 1 mil is 1/1000 of an inch thick - 75 mils is 75/1000 of an inch, or .075 inch
How thick is elephants skin?
2.5 to 3 centimeters thick.
If i have apply material 100 mil thick how thick is that in inches?
0.1 inch
How thick is a coping saw blade?
It is approximately 1/32 inch thick.
How thick is 1 16 inch?
Grab a coin such as penny or dime (assuming you're from USA). Look at the thickness of that coin. 0.0625 (1/16) inch is about that thick.
How thick is 1 mill?
.001 of an inch
