0
What else can I help you with?
How can you detect a direct current flowing thugh a wire?
you need to test it with a multi meter, set on the right settings. if you knew the voltage you could get an appropriate light bulb to suit the voltage and put that across the wire to test if there is current.
Why do you require a thermometer in a liebig condenser?
A thermometer is required in a Liebig condenser to monitor and control the temperature of the cooling water flowing through the condenser. This is important to ensure optimal cooling efficiency and to prevent overheating, which could lead to loss of condensation and inefficient distillation.
How many galleons of water can be pumped through an inch and a quarter copper pipe?
As many as could flow through before eroding the piping to the point of no more flowing through and it simply spewing about.
The ampere is the unit of electric in the metric system The amount of current per second is what?
The ampere is the unit that measures current. The current is like a flow in a pipe or a river. Just like a flow could be liters or gallons per second, one ampere is 6.24 x1018 electrons passing per second.
Why do you register 2 amps on an electrical meter?
Registering 2 amps on an electrical meter could indicate that there are two separate circuits drawing 1 amp each, or it could mean that there is a single circuit with a total load of 2 amps. The meter simply sums up the current flowing through each circuit it is measuring.
How transformer output connections get burn?
Poor connections could result in arcing; the transformer could be overloaded as well, resulting in more current flowing through them than designed.
How moeller's overload relay works?
Moeller's overload relay works by monitoring the current flowing through a motor. If the current exceeds a set value for a period of time, the relay will trip and disconnect power to the motor, protecting it from damage due to overheating. This helps prevent the motor from drawing too much current for an extended period, which could be harmful.
Can you provide an example problem that demonstrates the application of Ohm's Law?
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage across it and inversely proportional to its resistance. An example problem could be: if a circuit has a voltage of 12 volts and a resistance of 4 ohms, what is the current flowing through the circuit? Using Ohm's Law (I V/R), we can calculate the current to be 3 amperes.
What is The rate or speed of water flowing through the pipe that is like the rate of the electricity flowing through a conductor measured in?
gallons per minute could be considered analogous to amperes
Why does my 20 amp breaker keep tripping?
Your 20 amp breaker may be tripping due to an overload of electrical current flowing through it. This could be caused by too many devices plugged into the circuit or a faulty appliance drawing too much power. It is important to identify and address the source of the overload to prevent potential electrical hazards.
How can you detect a direct current flowing thugh a wire?
you need to test it with a multi meter, set on the right settings. if you knew the voltage you could get an appropriate light bulb to suit the voltage and put that across the wire to test if there is current.
Why a series resistor is necessary when a diode is forward-biasedexplain?
A series resistor is necessary when a diode is forward-biased to limit the current flowing through the diode and prevent damage to the diode. Without a series resistor, the diode could draw excess current and overheat, potentially causing it to fail. The resistor helps control the current and protect the diode in the circuit.
What is the current flowing through a 200 watt resistor that has a rating of 21 ohms?
The current can't be calculated from the information given in the question.The power rating of a resistor is the maximum power it can dissipate before it overheatsand its resistance possibly changes permanently. The power rating is not the amount ofpower it always dissipates.So, all we really know about the resistor in the question is that its resistance is 21 ohms.And all we can say about the current through it is:Current through the resistor = (voltage between the ends of the resistor) divided by (21).
How does the insulator at the bottom of a light bulb prevent the bulb from blowing out?
The insulator at the bottom of a light bulb prevents the bulb from blowing out by isolating the electrical current and preventing it from flowing directly to the base, where it could cause a short circuit. This insulator helps maintain the proper flow of electricity through the filament, allowing the bulb to produce light without overheating and burning out.
Why do you short voltage source and open current source while using superposition theorem?
You short a voltage source when doing this analysis because you do not know how much current will flow through the voltage source - consider it an undefined value. For the same reason, you open a current source since you know how much current will be flowing through it. This is a simple explanation; I'm sure a more exhaustive, technical one could be made if this is not sufficient.
Why did the GFI trip in my kitchen suddenly?
The GFI tripped in your kitchen suddenly because it detected a ground fault, which means there was an imbalance in the electrical current flowing through the circuit. This could be caused by a faulty appliance, water leakage, or wiring issues.
Why would a fuse blow in a 12 volt negative ground radio?
The fuse would most likely blow as a result of current flowing through it in excess of the current that the fuse is rated for. In general, there are two things that could cause this: Most likely, either the fuse installed was rated for less current than the radio uses in normal operation, or else a fault in the radio caused more current than usual to flow through the fuse.
