0
What else can I help you with?
How deep should the ditch be for a 200 amp service?
The ditch for a 200 amp service should typically be 24 to 30 inches deep to meet electrical code requirements and ensure proper protection for the service conductors. It's important to follow local building codes and regulations when determining the depth of the ditch to ensure safety and compliance with electrical standards.
What is under the reflecting pool in dc?
Under the Reflecting Pool in Washington, D.C., lies a system of drainage and water management designed to maintain the water level and quality of the pool. The pool itself is shallow, about 18 inches deep, and is lined with a concrete base that helps with stability and drainage. Additionally, the area beneath can house utilities and maintenance access points for the surrounding monuments and landscaping. Overall, the space is primarily functional, serving to support the pool's aesthetic and environmental needs.
How deep do juniper hedges roots go?
Juniper hedge roots can generally grow between 12-18 inches deep, but in some cases can extend as deep as 3 feet depending on the variety and soil conditions. It's important to provide good drainage and avoid planting them near structures with shallow foundations.
How much area does a gallon of water fill in inches?
A gallon of water occupies 231 cubic inches of space, as there are 231 cubic inches in a gallon. To find the area it fills in inches, we need to divide this volume by the height at which the water is spread. If we assume the water is spread evenly at a height of 1 inch, the area covered by a gallon of water would be 231 square inches.
How many gallon of water can a container hold that is 12 inches deep x 24 inches wide x 50 inches long?
12x24x50 = 14,400 cubic inches = 8.33 cubic feet A cu ft hpolds about 7.5 gallons 8.33 x 7.5 = 62.5 gallons
A deep ditch carved over time by running water is called what?
A deep ditch carved over time by running water is called a ravine.
How deep should a French drain be installed to effectively manage water drainage?
A French drain should typically be installed at a depth of about 18 to 24 inches to effectively manage water drainage.
How deep do French drains need to be installed to effectively manage water drainage?
French drains should typically be installed at a depth of 18 to 24 inches to effectively manage water drainage.
How deep does a French drain need to be installed to effectively manage water drainage?
A French drain should typically be installed at a depth of 18 to 24 inches to effectively manage water drainage.
How deep should you dig a trench for proper drainage in your backyard?
For proper drainage in your backyard, you should dig a trench that is at least 12 inches deep.
What is the difference between a gully and a ditch?
A gully is a water-worn ravine or small valley, often caused by erosion from heavy rain or flooding. A ditch, on the other hand, is a man-made trench dug to channel water or provide drainage. While both can be used to manage water flow, gullies typically form naturally, whereas ditches are constructed by people.
Two brothers are digging a drainage ditch for a french drain around their home The ditch is to be 2 feet deep 1 foot wide and 40 feet long The older brother can dig the ditch in 14 hours The youn?
7.7 hours
What is a deep ditch carved overtime by running water?
A canion.
How deep is 30 inches of water?
30 inch's of water how deep
What do you call a deep ditch that surround a castle and is filled with water?
It is called a moat
What is a deep ditch?
A deep ditch is a long, narrow excavation in the ground that is significantly deeper than it is wide. It is often used for drainage, irrigation, or as a boundary marker. Deep ditches can also serve as trenches for utility lines or for erosion control in landscaping. The depth and design can vary based on its intended purpose and the surrounding environment.
What is a deep water carved gully or ditch?
A deep water carved gully or ditch is a channel formed in the Earth's surface by the flow of water. These features are typically created through erosion over long periods of time, usually by rivers or streams carrying water that cuts into the land and forms a steep-walled channel. They are common in areas with high water flow or where the land is soft and easily eroded.
