0
What else can I help you with?
What size grounding wire do you use as the 4th wire running in your conduit from your 200 amp meter box to your 200amp service panel this is the ground wire from box to box?
For a 200 amp service, you would typically use a 4/0 AWG copper wire for the grounding wire running between the meter box and the service panel. This size is suitable for carrying the necessary current and providing proper grounding protection for the electrical system.
Can you use a 200Amp disconect to feed a 100Amp main panel?
No, it is not recommended to use a 200A disconnect to feed a 100A main panel. The disconnect should always be rated equal to or higher than the main panel it is feeding to ensure proper protection and capacity handling. It is important to match the amperage ratings to avoid potential overload and safety hazards.
Can you hook up 200 amp dervice to a 125 amp service panel?
No, it is not safe or recommended to connect a 200 amp service to a 125 amp panel. The panel must be rated to match the amperage of the service to avoid overloading the panel and potential fire hazards. It is important to upgrade the panel to match the service amperage.
What is the largest sub panel you can install off from a 60 amp main panel fed by 100 amp service?
If what you state in this question is accurate this is an illegal installation. A 100 amp service can not have any equipment connected to it less that that of the service size. The 60 amp main panel must be a 100 amp panel to be a legal installation.
How do you wire a 50A service pole from your 200A breaker box so you can keep your motor home plugged up?
If the service pole is only rated for 50 amps, that is all it is designed to handle. The service pole has to be upgraded to handle a home that has a 200 amp entrance panel. Call an electrician and pay for his/her expertise!! Your Family is too important to rely on the advice of a salesperson. I believe your asking how would you add a 50a service pole using your 200amp service? I would highly recommend having a licensed electrician do the work for you as electricity will kill you if you even touched the wrong spot!! Otherwise, You would need all the necessary items from possibly a home improvement ctr and a book on how to do wiring plus all the necessary permits from your town or city etc... (without the proper permits your insurance carrier wouldn't have to pay if a clain were ever made and traced back to your wiring!) Check your 200amp box to see if you have at least 2 empty slots as you'll need at least that many to run that amount of power, 220 volts, Hope this helps a bit.
What size ground wire needed for a 200amp service panel in new jersey?
#6 bare copper wire.
What size ground wire is needed for 200amp service pannel in Chicago?
200 amp service in chicago uses 3 aught.
Can you feed a 208v 200amp panel from 480v 20amp circuit?
Not directly, you would need to transform 480v circuit to 120v with a transformer first.
What size grounding wire do you use as the 4th wire running in your conduit from your 200 amp meter box to your 200amp service panel this is the ground wire from box to box?
For a 200 amp service, you would typically use a 4/0 AWG copper wire for the grounding wire running between the meter box and the service panel. This size is suitable for carrying the necessary current and providing proper grounding protection for the electrical system.
What size service entrance conductors do you use for a 200amp service?
3/0 copper wire with 90 degree insulation is rated at 210 amps. 75 degree insulation is rated at 200 amps.
When was Dominion Bond Rating Service created?
Dominion Bond Rating Service was created in 1976.
Can you use a 200Amp disconect to feed a 100Amp main panel?
No, it is not recommended to use a 200A disconnect to feed a 100A main panel. The disconnect should always be rated equal to or higher than the main panel it is feeding to ensure proper protection and capacity handling. It is important to match the amperage ratings to avoid potential overload and safety hazards.
What is an service panel?
The place where the power drop from the electric company enters your house. The service panel is where the fuses or breaker switches are.
Who played James Bond in In Her Majesty's Secret Service?
George Lazenby played Bond in "0HMSS"George Lazenby was Bond in his only outing in On Her Majesty's Secret Service.
Can you hook up 200 amp dervice to a 125 amp service panel?
No, it is not safe or recommended to connect a 200 amp service to a 125 amp panel. The panel must be rated to match the amperage of the service to avoid overloading the panel and potential fire hazards. It is important to upgrade the panel to match the service amperage.
How can I safely bond a gas line to an electrical panel?
It is not safe to bond a gas line directly to an electrical panel. It is recommended to consult a licensed electrician or plumber to properly ground and bond the gas line to ensure safety and compliance with building codes.
What is the maximum current capacity of a 100 amp service panel?
The maximum current capacity of a 100 amp service panel is 100 amps.
