answersLogoWhite

0

Wire sizes and ampacity are regulated by code. # 14 wire 15 amps, #12 wire 20 amps, #10 wire 30 amps, #8 wire 40 amps, #6 wire 60 amps. These are the most common, a slight variation in amperage depending on the insulation factor.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

How many appliances can be used in 3.5kwh?

The number of appliances that can be used in 3.5 kWh depends on the energy consumption of each appliance. To calculate, divide 3.5 kWh by the average energy consumption of each appliance in kWh to determine how many can be used.


How many watts are used in 1 hour of cooking?

The number of watts used during cooking depends on the appliance and its energy consumption. For example, a microwave typically uses around 800-1200 watts, while an oven can use 2000-5000 watts. To calculate the total watt-hours used in 1 hour of cooking, you would multiply the appliance's wattage by the number of hours it is used.


How can I determine the amount of electricity consumed by a device or appliance?

To determine the amount of electricity consumed by a device or appliance, you can use a device called a wattmeter or check the device's power rating in watts and the time it is used to calculate the energy consumption in kilowatt-hours.


Calculate 120Volt 15 amp appliance kWh?

Well, a 120V appliance that draws 15A would be using 1800W. (15x120). A killowatt hour is one killowatt used continuously for an hour. If you used that device for one hour straight, it would use 1.8 kWh. (Keep in mind the device may not draw a full 15A)


Why do some appliances need thicker wire cable than others what would happen if thin cables is used?

Some wires need to be thicker than others because depending on the appliance a different amount of voltage will be passing through the wires. If a wire was very thin the wire would get so hot it would burn, melt and/or catch on fire. Hope this helps.

Related Questions

If you know the power rating of an appliance and the voltage of the line it is attached to you can you calculate the current used by the appliance?

If I understood your question correctly, 'If you know the power rating of an appliance and the voltage of the line it is attached to, can you calculate the current used by the appliance?' You are looking for this equation: I = Current (Amps) P = Power Rating (Watts) V = Voltage (Volts) I = P/V This equation is useful when calculating the fuse rating for an appliance. For example, and appliance rated at 2400 watts, supplied with 240 volts has a 10 amp maximum. I = 2400/240 however, when it comes to paying for electricity, the energy is measured in units, which can be found using the equation: P = Power (kW) t = Time (Hours) Energy Used (Units) = Pt for example, an appliance rated at 2 kW used for 3 hours, uses 6 units of energy. Units = 2*3


What is the equation to find the amount of energy used. By appliance?

The equation to calculate the amount of energy used by an appliance is: Energy (kWh) = Power (kW) x Time (hours). Multiply the power consumption of the appliance in kilowatts by the number of hours it's used to find the total energy consumed in kilowatt-hours.


How many appliances can be used in 3.5kwh?

The number of appliances that can be used in 3.5 kWh depends on the energy consumption of each appliance. To calculate, divide 3.5 kWh by the average energy consumption of each appliance in kWh to determine how many can be used.


How calculate the cable size when give current?

The NEC has a table that shows what size cable to use with each amperage and where it can be used.


What is flex outlet?

An appliance cable or "flex" outlet is a type of electrical outlet which is NOT a "socket outlet" to take plugs for appliances so that they can be plugged and un-plugged. An appliance cable or "flex" outlet has terminals inside it. The terminals allow the wires in an appliance cable or "flex" to be connected to the household wiring in a building. The household wiring comes from the building's main electrical power panel, which carries the main circuit breakers. The circuit breakers are fitted to protect the household wiring from catching on fire if any circuit is overloaded. Such appliance cable or "flex" outlets also have strain-relief clips. A strain-relief clip helps to prevent the cable from being yanked out of the outlet if the appliance gets moved away from the wall where the outlet is installed. Such outlets, with terminals inside and strain-relief clips, are used for fixed appliances, such as ranges or dryers, which should never have to be un-plugged during normal use of the appliance by the user.


How many watts are used in 1 hour of cooking?

The number of watts used during cooking depends on the appliance and its energy consumption. For example, a microwave typically uses around 800-1200 watts, while an oven can use 2000-5000 watts. To calculate the total watt-hours used in 1 hour of cooking, you would multiply the appliance's wattage by the number of hours it is used.


How can I determine the amount of electricity consumed by a device or appliance?

To determine the amount of electricity consumed by a device or appliance, you can use a device called a wattmeter or check the device's power rating in watts and the time it is used to calculate the energy consumption in kilowatt-hours.


Is there somewhere that a person could go to get used appliance parts?

There are many places where you can buy used appliance parts. Many local restoration stores sell used appliance parts. You can also buy them online at Ebay (http://www.ebay.com) and Appliance Depot (http://www.appliancedepot.com).


What is auto feature?

A feature on an appliance which can be set or used so that the appliance will do its function automatically.


Calculate 120Volt 15 amp appliance kWh?

Well, a 120V appliance that draws 15A would be using 1800W. (15x120). A killowatt hour is one killowatt used continuously for an hour. If you used that device for one hour straight, it would use 1.8 kWh. (Keep in mind the device may not draw a full 15A)


What is the recommended usage of 2-2-2-4 SER cable in electrical installations?

The recommended usage of 2-2-2-4 SER cable in electrical installations is for applications that require a 100 amp service, such as feeding a subpanel or a large appliance. This type of cable is commonly used for residential and light commercial electrical wiring projects.


What is a network appliance used for?

A network appliance is a home appliance that can connect to control devices wirelessly. Lights can be turned on or ovens pre-heated remotely at the push of a button.