KVA (kilovoltamperes) is KW (kilowatts) divided by sin(90 - theta) where theta is the phase angle between voltage and current. This answer assumes a sinusoidal, linear load.
The unit of energy in an electricity bill is a kilowatt-hour, also known as a Unit. To calculate the energy in units, multiply the power in kilowatts by the time in hours.
what formula is used for calculate flow rate of pump vs kw
To calculate the power in kilowatts (kW) from amps (A), you also need the voltage (V). If the voltage is 120V, then 500A would equal 60 kW (since Power (kW) = Current (A) x Voltage (V) / 1000). However, without knowing the voltage, it's not possible to calculate the power in kilowatts.
1 watt is equal to 1/1000 kilowatts. To convert a value from watts to kilowatts just divide by 1000. To answer the question there is .001 kilowatts in one watt.
Volts x Amps = Watts, divide with 1000 and you get kilowatts.
The power output of a solar panel is measured in watts, not kilowatts. A typical residential solar panel can produce about 250-400 watts. To calculate kilowatts, divide the wattage by 1,000.
The unit of energy in an electricity bill is a kilowatt-hour, also known as a Unit. To calculate the energy in units, multiply the power in kilowatts by the time in hours.
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
what formula is used for calculate flow rate of pump vs kw
It depends on the voltage. For example if you had 120 volts (average Alternating Current supply voltage) you would have 6 kilowatts. However, if you were dealing with 12 volts (average Direct Current supply voltage) you would only have 1.4 kilowatts. Use the following equation to calculate the number of kilowatts produced from different voltages:(Voltage x 50)/1000 = # kilowatts
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
To calculate lighting load, you need to determine the total wattage of all the lights in the space. This is usually done by adding up the wattage of each light fixture or bulb. You can then convert this total wattage to kilowatts by dividing by 1000. Finally, multiply the total kilowatts by the number of hours the lights are on each day to calculate the daily lighting load in kilowatt-hours.
To change kilowatts to watts multiply by 1000.2400 kilowatts=2400,000 watts or 2,400,000 watts.If you meant how many kilowatts in 2400 wattsthen this is 2.4 kilowatts
If a dynamo puts out 100,000 kilowatts and the area it services only requires 80,000 kilowatts; then the remaining 20,000 kilowatts is known as its residual power. This extra capacity is useful in withstanding power spikes when consumer demand increases during peak periods.
6 horsepower = 4.47 kilowatts
18.95% of 4 billion kilowatts= 18.95% * 4000000000 kilowatts= 0.1895 * 4000000000 kiowatts= 758000000 kilowatts
The equation used to calculate the amount of electrical energy used is: Energy (in kilowatt-hours) = Power (in kilowatts) x Time (in hours).