A code scanner is the most valuable too for giving relatively complete information regarding an EFI engine. About the only things it won't check are fuel pressure, function of the fuel pump, status of the fuel filter and whether the injectors are fouled.
The stock throttle body on a 96 cubic inch Harley Davidson motor is typically around 50mm in diameter. This throttle body size is designed to provide adequate airflow for the engine’s performance needs.
the reason the throttle would be sticking on your focus is that it (the actual unit) could be dirty. or the throttle cable could have dirt in its casing. what you need too do is remove the throttle cable and spray engine degreaser in the casing and hang it up too let the dirt and grime drip from it. be sure to use wd-40 to relubricate the cable. now as of the throttle body do the same thing. but use a non abrasive cloth and wipe the unit clean. make sure there is no dirt in any small cracks or crevises.
They are absorption, injection, ingestion, and inhalation.absorption, injection, ingestion, inhalation
The four main routes of entry into the body are ingestion (eating or drinking), inhalation (breathing in gases or particles), absorption (through the skin or mucous membranes), and injection (directly into the bloodstream through a needle or injection).
Splitless injection is used as the concentration of all gases is low in the human body. Split injection is only used for concentrated samples.
Yes, the 94 had throttle body injection.
Which part is not shared by both throttle body injection and a carburetor ?
That would be throttle body injection (TBI).
1 injector
Yes, throttle body injection.
tbi is Chevy's abbreviation for Throttle Body Injection. In this type of fuel injection system fuel is squirted into the throttle body above the manifold.
No
Yes it does. It has throttle body injection. Jim
TBI or Throttle Body Injection
It's typically a "throttle body" injection vehicle. The box that sits on top of the intake manifold is called the throttle body, and the injectors are in there.
Throttle body injection has one injector located in the throttle body that supplies fuel to the intake manifold. This fuel flows to all cylinders just like it does on a vehicle with a carburetor. Port injection uses tubes with poppet valves from a central injector to spray fuel at each intake port rather than the central throttle body.
It has TBI / Throttle body injection.