0
What else can I help you with?
How do you figure cubic feet of dirt?
To calculate the cubic feet of dirt, measure the length, width, and depth of the area in feet. Then, multiply the three dimensions together to get the volume in cubic feet. Formula: Length (ft) x Width (ft) x Depth (ft) = Cubic Feet of Dirt.
How many cubic feet in 132 sq feet?
Cubic feet is a 3 dimensional measurement (width x length x height), and Square feet is only two dimensional (width x length) therefore, Cubic feet can not be converted to Square feet.
HOW MANY CUBIC FEET IN A 13' X 32' CONTAINER?
Not enough information to answer. You need length, width and depth.
How many feet would a ton of limestone cover 4 inches deep and 8 feet wide?
To find out how many feet a ton of limestone would cover at a depth of 4 inches and a width of 8 feet, first convert the depth to feet (4 inches = 1/3 foot). A ton of limestone is approximately 1.5 cubic yards, which equals about 40.5 cubic feet. The volume covered can be calculated using the formula: Volume = Width × Length × Depth. Rearranging gives Length = Volume / (Width × Depth). Plugging in the values, Length = 40.5 cubic feet / (8 feet × 1/3 foot) = 15.1875 feet. Therefore, a ton of limestone would cover approximately 15.2 feet long at the specified depth and width.
How do you Convert 180000 cubic ft into square ft?
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
How do you convert m2 to m3?
You cannot convert m2 to m3 without a third measurement as a cubic measurement is width plus length pus depth.
What is the formula to calculate concrete yards on a driveway?
To calculate the concrete yards needed for a driveway, first measure the length, width, and depth (thickness) of the area in feet. Use the formula: Volume (cubic feet) = Length (ft) × Width (ft) × Depth (ft). Then, convert cubic feet to cubic yards by dividing the total volume by 27 (since there are 27 cubic feet in a cubic yard). The final formula is: Concrete Yards = (Length × Width × Depth) / 27.
How do you figure cubic feet of dirt?
To calculate the cubic feet of dirt, measure the length, width, and depth of the area in feet. Then, multiply the three dimensions together to get the volume in cubic feet. Formula: Length (ft) x Width (ft) x Depth (ft) = Cubic Feet of Dirt.
How do you convert width and length and height to cubic meter?
multiply them
How many cubic yards of dirt must be dug out to make the ditch?
To determine how many cubic yards of dirt must be dug out to make a ditch, you need to know the dimensions of the ditch: its length, width, and depth. The volume can be calculated using the formula: Volume = Length × Width × Depth. Once you have the volume in cubic feet, divide that number by 27 (since there are 27 cubic feet in a cubic yard) to convert it to cubic yards.
Can you convert cubic meters into length x width x height without any further information?
No. You cannot convert cubic meters in length, width, and height without any further information.
Formula to calculate volume of liquid in gallons of a rectangular tank?
Volume = (length) x (width) x (depth of liquid)-- Volume, cubic inches = (Length, inches) x (width, inches) x (depth, inches)Gallons = (Volume, cubic inches)/231-- Volume, cubic feet = (Length, feet) x (width, feet) x (depth, feet)Gallons = (Volume, cubic feet) x (7.4805)
How do you convert cubic mitre to square mitre?
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
How do you convert square foot into cubic feet?
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
How many cubic feet in square feet of stone?
Square feet is length x width and is given in square feet. Cubic feet is length x width x depth and is given in cubic feet.
How to convert 157 cubic meters to square meters?
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
Can you Convert 226 square meters to cubic meters?
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
