answersLogoWhite

0

Measure the diameter and from that calculate the volume, then determine the mass of the sphere on a weighing device. Then it's just

density = mass/volume

==========================

It again depends on the sphere whether its hollow or its a solid sphere

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Natural Sciences

An object will sink in a liquid if the density of the object is greater than that of the liquid. the mass of a sphere is 9.83g. if the volume of this sphere is less than blank cm3 then the sphere will?

If the volume of the sphere is less than 1 cm3, then the sphere will sink in the liquid as its density is greater than that of the liquid.


If the mass of a sphere is 75 grams what is the volume?

To find the volume of the sphere, you need to know the density of the material the sphere is made of. With just the mass provided (75 grams), you cannot calculate the volume without this additional information.


How do you find the mass density of a sphere who's mass is 5000 grams?

Density is the mass per unit volume. e.g. kg/m3. But you've only given one of the quantities needed - we still need the volume of the sphere.


Is an orbital a sphere of uniform density?

No, an orbital is a region in space where there is a high probability of finding an electron in an atom. The shape and size of an orbital can vary depending on the energy level and type of orbital (s, p, d, f). It does not have uniform density like a solid sphere.


How would you find the density of plasticine?

Roll the plasticine into a sphere and measure the diameter and use the formula for the volume of a sphere V=pi r^2, then weight the sphere to get the mass and use Density = Volume upon Mass. Alternatively, use Archimedes' principle: 1) Weigh a piece of plasticine to get its mass. Very carefully fill a glass with water so full that it cannot contain one more drop of water. Immerse the plasticine in the glass, collecting the water that has run out of the full glass. The volume of the water is equal to the volume of the plasticine. Determine the volume of the water by either weighing it (density of pure water is 1 g per mL) or by accurately measuring the volume. Density = mass (g)/ volume (mL) 2) If you have a balance that can determine mass of an hanging object, first weigh your plasticine to determine its mass. Then attach it to string and take its mass hanging (the string also has mass). Then take its mass while the plasticine is just submersed in water. It will weigh less when submersed in water. The loss of mass when submersed is equal to the mass of water that has the same volume as the plasticine. (density of water is 1 g per mL) Now you can determine the volume of the plasticine since the mass lost in g equals the volume of water in mL. Density is the original mass divided by the volume.

Related Questions

How much accurate will be the measurement of radius of a sphere with the help of a vernier scale?

It depends on the graduations on the vernier scale.


What is the density of a 31g sphear?

Not enough data is provided. To obtain density, you must divide mass through volume.


Density of a sphere?

you need the mass and radius of the sphere- density = mass divided by volume, so mass/volume. the volume of a sphere is 4 divided by 3 multiplied by pi multiplied by the radius squared. 4/3(π)(r^2).


If your caliper has dual pistons and one is popped out because they are not pushed in at the same time will this damage the caliper?

1、Vernier caliper`s history in Europe The vernier caliper was invented in its modern form by the French mathematician Pierre Vernier. He is a quite well known mathematician, in his mathematical monograph "La construction, l'usage, et les propriétés du quadrant nouveau de mathematiques" chronicles the vernier caliper structure and principle, In it he described the ingenious device which now bears his name, the Vernier scale. And that the well-known vernier caliper has not been seen, so some have questioned whether he made a vernier caliper. 1851 by the American company will Nonuth Brown & Sharpe and Vernier two ideas to create the first vernier caliper, rear arsenal to be improved by the German Masuer manufacturing, is the most widely used engineering gages. 1854 Netherlands, France, Germany, Britain, have generally use the vernier caliper. Germany Mahr in 1871 has produced the world's first vernier caliper, micrometer, is the world's oldest manufacturer of precision measuring instruments, is one of the world's three meter suppliers. Marking the vernier caliper into mass production stage. 2、Vernier caliper`s history in America The American and British people called for the vernier caliper Vernier Caliper, to commemorate the inventor of the sliding scale Pierre Vernier. In 1872, with the American Society of Mechanical rapid industrial development began large-scale use of vernier caliper. Sharp, founder of American Machinery Co., Ltd. in the fall of 1985 the world's first successful batch processing of four 0-4 inch vernier caliper with an accuracy up to 0.001 mm. It marks that calipers enter the era of precision measuring. 2、Vernier caliper`s history in South America In 1946, with the South American country's liberation and the initial development of industry, vernier calipers had been used by South American countries, such as Brazil, Argentina. 2、Vernier caliper`s history in Japan Japan and Germany name caliper Nonuth, in order to commemorate the caliper valve Nonuth's In 1856, Japan has also popularized the vernier caliper, vernier caliper manufacturing technology increased gradually updated rapidly, making it a versatile lengthmeasuringtool. 2、Vernier caliper`s history in China All kinds of measuring instruments in the family, the vernier caliper is widely used as a high-precision measurement tool which is engraved line extension and expansion of the ruler , which originated in China . Early Ancient measuring length mainly uses wood or rope , or use the " move " , " cloth hand" approach, the length of the units to be had after the ruler engraved lines appeared. The reticle ruler in 3000 BC in ancient Egypt, in 2000 BC era of Xia and Shang has been used, which was mainly made ​​of ivory and jade, bronze engraved lines until the emergence of such a ruler "advanced" more measurement tools used in the production and astronomical measurements. Chinese Han science and technology developed, invented a lot of the time the world's leading advanced equipment and appliances, such as the armillary sphere, seismograph, water discharge, etc. These round shaft birth engraved lines are clear that the birth of a ruler in China. In Beijing National Museum collection "Xinmang copper calipers", after expert research, it is the world's earliest discovered caliper, manufactured in 9 AD, from the year 1900 for many years. Compared with China, the foreign inventions in the field late in the caliper more than 1,000 years, the earliest is the UK's "caliper ruler", shaped like a vernier caliper, but with the same caliper Xinmang copper, it is only one groove calipers, accuracy and use of range are low. May 1992 at 8 km northwest of the city of Yangzhou Hanjiang Oasis Township (now Oasis Hanjiang Town) successfully cleaned up an early Eastern Han Dynasty brick tomb, unearthed from the tomb of a brass caliper, brass caliper this by a fixed scale and activities feet and other parts of composition. Fixed-foot full-length 13.3 cm, 5.2 cm long fixed jaw, width 0.9 cm, thickness 0.5 cm. Top with fish-shaped handles fixed scale length 13 cm, middle to open a guide groove, the groove can be rotated built an adjustable guide pins, follow the guide slot and move around. Events and activities in the claw-foot indirect one ring handle, easy to tether or grip. Phase and two claws, the fixed foot and Events foot length. When used, the left hand holding the fish-shaped handle, right hand affects the ring handle, pull around to measure the workpiece. This gauge can measure objects with a diameter, depth, and can be measured length, width, thickness, easy and precise than a ruler. Unfortunately because of the age, its fixed and activities ruler ruler measurement scale and chronology inscriptions, have been corroded illegible. 1976 national differences based on specifications, set the international standard (ISO-3599-1976). China has also developed a measuring ruler Chinese National Standards (CNS 4175-B6030). It would be best to replace the seals as you may have damaged the old seals in the process. You can buy a rebuild kit with seals and boots.


What is the formula for calculating the charge density of a sphere?

The formula for calculating the charge density of a sphere is Q / V, where is the charge density, Q is the total charge of the sphere, and V is the volume of the sphere.


Which function does a Vernier caliper have?

1、Vernier caliper`s history in EuropeThe vernier caliper was invented in its modern form by the French mathematician Pierre Vernier. He is a quite well known mathematician, in his mathematical monograph "La construction, l'usage, et les propriétés du quadrant nouveau de mathematiques" chronicles the vernier caliper structure and principle, In it he described the ingenious device which now bears his name, the Vernier scale. And that the well-known vernier caliper has not been seen, so some have questioned whether he made a vernier caliper.1851 by the American company will Nonuth Brown & Sharpe and Vernier two ideas to create the first vernier caliper, rear arsenal to be improved by the German Masuer manufacturing, is the most widely used engineering gages. 1854 Netherlands, France, Germany, Britain, have generally use the vernier caliper.Germany Mahr in 1871 has produced the world's first vernier caliper, micrometer, is the world's oldest manufacturer of precision measuring instruments, is one of the world's three meter suppliers. Marking the vernier caliper into mass production stage.2、Vernier caliper`s history in AmericaThe American and British people called for the vernier caliper Vernier Caliper, to commemorate the inventor of the sliding scale Pierre Vernier. In 1872, with the American Society of Mechanical rapid industrial development began large-scale use of vernier caliper.Sharp, founder of American Machinery Co., Ltd. in the fall of 1985 the world's first successful batch processing of four 0-4 inch vernier caliper with an accuracy up to 0.001 mm. It marks that calipers enter the era of precision measuring.2、Vernier caliper`s history in South AmericaIn 1946, with the South American country's liberation and the initial development of industry, vernier calipers had been used by South American countries, such as Brazil, Argentina.2、Vernier caliper`s history in JapanJapan and Germany name caliper Nonuth, in order to commemorate the caliper valve Nonuth'sIn 1856, Japan has also popularized the vernier caliper, vernier caliper manufacturing technology increased gradually updated rapidly, making it a versatile lengthmeasuringtool.2、Vernier caliper`s history in ChinaAll kinds of measuring instruments in the family, the vernier caliper is widely used as a high-precision measurement tool which is engraved line extension and expansion of the ruler , which originated in China . Early Ancient measuring length mainly uses wood or rope , or use the " move " , " cloth hand" approach, the length of the units to be had after the ruler engraved lines appeared. The reticle ruler in 3000 BC in ancient Egypt, in 2000 BC era of Xia and Shang has been used, which was mainly made ​​of ivory and jade, bronze engraved lines until the emergence of such a ruler "advanced" more measurement tools used in the production and astronomical measurements.Chinese Han science and technology developed, invented a lot of the time the world's leading advanced equipment and appliances, such as the armillary sphere, seismograph, water discharge, etc. These round shaft birth engraved lines are clear that the birth of a ruler in China. In Beijing National Museum collection "Xinmang copper calipers", after expert research, it is the world's earliest discovered caliper, manufactured in 9 AD, from the year 1900 for many years. Compared with China, the foreign inventions in the field late in the caliper more than 1,000 years, the earliest is the UK's "caliper ruler", shaped like a vernier caliper, but with the same caliper Xinmang copper, it is only one groove calipers, accuracy and use of range are low.May 1992 at 8 km northwest of the city of Yangzhou Hanjiang Oasis Township (now Oasis Hanjiang Town) successfully cleaned up an early Eastern Han Dynasty brick tomb, unearthed from the tomb of a brass caliper, brass caliper this by a fixed scale and activities feet and other parts of composition. Fixed-foot full-length 13.3 cm, 5.2 cm long fixed jaw, width 0.9 cm, thickness 0.5 cm. Top with fish-shaped handles fixed scale length 13 cm, middle to open a guide groove, the groove can be rotated built an adjustable guide pins, follow the guide slot and move around. Events and activities in the claw-foot indirect one ring handle, easy to tether or grip. Phase and two claws, the fixed foot and Events foot length. When used, the left hand holding the fish-shaped handle, right hand affects the ring handle, pull around to measure the workpiece. This gauge can measure objects with a diameter, depth, and can be measured length, width, thickness, easy and precise than a ruler. Unfortunately because of the age, its fixed and activities ruler ruler measurement scale and chronology inscriptions, have been corroded illegible.1976 national differences based on specifications, set the international standard (ISO-3599-1976). China has also developed a measuring ruler Chinese National Standards (CNS 4175-B6030).


What is the surface charge density formula of a sphere?

The surface charge density formula of a sphere is Q / 4r, where is the surface charge density, Q is the total charge on the sphere, and r is the radius of the sphere.


What is the charge density formula for a sphere?

The charge density formula for a sphere is Q / V, where is the charge density, Q is the total charge, and V is the volume of the sphere.


What is the formula for calculating the surface charge density of a sphere?

The formula for calculating the surface charge density of a sphere is: Q / 4r, where represents the surface charge density, Q is the total charge on the sphere, and r is the radius of the sphere.


What is the diameter of a spherical protein if the protein is spherical and has a density of 1gcm3?

To answer this question, the mass of the spherical protein is needed. the fact that the protein is a sphere and that it has a density of 1gcm3 is not enough information to determine the diameter.


What object has the greatest density gold sphere plastic cube or wooden sphere?

a gold sphere


What is the electric field inside a sphere of uniform charge density?

The electric field inside a sphere of uniform charge density is zero.