answersLogoWhite

0

You can always figure out which fuse to pull and pull it from the fuse box. This will prevent the antenna motor from getting power. The downside to this method is that fuse may also control power to other features, like electric doorlocks or other items. You'll have to pull it and see what else gets affected. The other option is to disconnect the power the motor. However, this may not be so easy. You have to be able to get access to the antenna motor and sometimes these things are buried in the body panel. You would want to disconnect the wire from the fuse box also so you don't have a live wire hanging out inside the dash.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do you disable a GPS in a laptop?

Tape a sheet of kitchen aluminum foil around the antenna.


Does shiny foil disable gps devices?

Shiny foil or aluminum foil does not disable GPS devices. GPS signals are transmitted from satellites in space, and they can penetrate materials like foil. However, wrapping a GPS device in foil might interfere with its ability to receive signals, which could reduce its accuracy or block the signal altogether.


Is there any technology that could disable all electronics in a house or small building?

Well, if its plugged into an outlet, turning off the main service box switch will disable it.If you want to DESTROY all the electronics there an EMP machine will do it. But these machines are very expensive and require very large amounts of electric power themselves. They are also not selective or directional and will destroy all electronics around them to the limit of their range in every direction.


Can someone be born with an extra pair of chromosomes?

yes but they are disable when this happens it is really sad


How do you disable security system on a 2002 avalanche?

To disable the security system on a 2002 Chevrolet Avalanche, you typically need to use the key fob to unlock the doors, as this deactivates the system. If the fob is not available, inserting the key into the driver's side door and turning it to the unlock position can also disable the system. If the security system continues to activate, you may need to consult the vehicle's manual or a professional for further assistance.

Related Questions

What fuse disconnects radio antenna motor?

I can confirm that the 1993 Caprice Classic also uses Fuse 1 for this, which is painful because now that the power antennas are failing in the - let me keep trying to lower the antenna for the next week while I'm parked in the garage - mode, and you can't get through the wheelwell to get at the motor or under the dash to locate a wire, you need to disable the interior lighting and the power locks. By the way, the fuse box is on the left side of the dash and can only be seen with the drivers door open. The fuse number for your power antenna will depend on what year your Caprice is. For example , on a 1991 Caprice fuse number 1 is used for the power antenna relay as well as other items such as the dome light, underhood light, power door locks, power mirrors etc.


How can you disable the power antenna on a Lexus SC430?

Select the CD option on the radio, will CD is playing hold down the RDS buttom until the antenna goes down.


How do you disable the speed warning on a 1996 Caprice?

A tuning program for the PCM is the correct answer, PCM For Less can do it for you quickly and at a reasonable price.


How do you disable theft system in Chevy 2004 Malibu classic?

Turn ignition switch on ,(don't start car) for about 10 min that will disable theft system.


How do you disable Renault grand scenic electric handbrake?

You can't.. why would you want to do that!


Can ELECTRIC door on odyssey be changed to manual?

I have a 2005 odyssey EX and yes, you can disable the power doors. Where your open close toggle switches are to the left of the steering wheel, i have a slide button that i can disable the electric door and they are manual at that point. Hope that helps


How do you disable theft system on a 2005 Malibu classic?

Remove the BCM. This will also disable many of the vehicle's most popular features, so it isn't a very practiacal solution, but it is the only way.


How can you disable the GPS on your 2008 Town and Country?

To disable the GPS on a 2008 Chrysler Town and Country, you can either turn off the navigation system through the dashboard menu or physically disconnect the GPS antenna. To turn it off, access the "Settings" or "Navigation" menu on the touchscreen and select the option to disable or turn off the navigation feature. If you want to physically disconnect it, locate the GPS antenna, usually found under the dashboard or roof, and unplug it. Always consult your owner’s manual for specific instructions related to your vehicle model.


Can you disable electric sliding door on Buick terraza?

Yes, you can disable the electric sliding doors on a Buick Terraza. This is typically done using the controls on the dashboard or by adjusting the settings in the vehicle's user manual. If you want to disable them temporarily, you can usually find a switch or button that allows you to turn off the automatic function. For more permanent solutions, consulting a professional or referring to the vehicle's service manual is recommended.


How to Re-install classic Firefox tool bar?

go onto Tools, add-ons, and then enable or disable the tool bars you want or don't want.


How can you disable theft deterrent system on a 2004 Malibu Classic?

To disable the theft deterrent system on a 2004 Malibu Classic, you can try using the key fob to unlock the doors or start the vehicle, as this may reset the system. If that doesn't work, you can disconnect the battery for about 10-15 minutes to reset the system. Additionally, if the issue persists, consulting the vehicle's manual or a professional mechanic may be necessary for further assistance.


What tab within the pivottable options dialog box contains the option to switch the excel 2010 report to classic layout mode?

In Excel 2010, to switch the PivotTable report to classic layout mode, you need to go to the "Layout" tab within the PivotTable Options dialog box. In this tab, you can find the option "Classic PivotTable Layout" which allows you to enable or disable the classic layout mode for your PivotTable.