plastic fire is solid fire so u can use DCP fire extinguisher . other wise water.
Fire-resistant plastic. There are several kinds.
Class A fire: flammable solids--wood, paper, cloth, things like that. Class B fire: flammable liquids Class C fire: electrical fire. A Class C fire is one where electric sparks ignite something else like wood or gasoline, but it's classified differently because it must be extinguished with a nonconductive agent to prevent the firefighters from being electrocuted. Class D fire: flammable metals Class K fire: kitchen fires. These are technically Class B fires--grease is a flammable liquid--but they are very hard to put out, so special extinguishing systems are used.
A class C fire involves energized electrical equipment. It should not be extinguished using water, as it can conduct electricity and cause electrocution. To extinguish a class C fire, it is recommended to use a dry chemical or carbon dioxide fire extinguisher designed for use on electrical fires.
In a plastic factory, raw plastic material is processed and shaped through heating, molding, extrusion, or injection molding techniques. Additives such as colorants, stabilizers, and fillers may be mixed in to enhance the material's properties. Finally, the plastic is cooled and trimmed into the desired shape or form.
Electrical fires should not be extinguished with water, as it can conduct electricity and increase the risk of electrocution. Instead, electrical fires should be put out using a Class C fire extinguisher or by cutting off the power source if safe to do so.
An Extinguished fire is put out and a raging fire is continuing to burn .
Extinguished is a verb. It's the past tense of extinguish.
Yes. Coat or paint it with fire resistant material like asbestos.
i would have to say plastic 95% of the time
Nancy poured baking soda on the grease fire to extinguish the flame.
Fire needs oxygen to burn and when the tumbler covers the fire it uses up all the oxygen in the little space quickly and is extinguished.
The fireman was exhausted after extinguishing the fire. or By the time the firemen reached the burning building, the heaven sent rain was already in the process of extinguishing the fire.
It suffoctaes the fire by depriving the fire of air which it needs to burn.
In "To Build a Fire," the second fire is extinguished when the man tries to ignite a match to start a fire after falling into the freezing water. The wet conditions prevent the fire from lighting, causing the man to lose his last chance to warm himself and survive in the harsh wilderness.
White phosphorus can be extinguished by smothering it with a non-flammable material such as sand, covering it with water, or using a Class D fire extinguisher specially designed to handle chemical fires. It's important to handle white phosphorus with care as it can reignite if not completely extinguished.
They will reenter the building when the microwave fire is extinguished.
Combustible metals like aluminum or magnesium