0
7.6 ml
What else can I help you with?
Beaker X contains 50cm3 of marbles while Beaker Y contains 100cm3 of water. When all the water in Beaker Y is poured into Beaker X what is the volume of the water in Beaker X?
The volume of the water in Beaker X will be 100cm3, as you are not adding any more water to the equation (50X+100Y is not 150Y or X, but 50X+100Y) The total volume of matter in Beaker X will be 150cm3, and if the beaker is labelled, the volume measure will indicate 150cm3 due to the displacement of water. But as the answer to your question, the volume of water in Beaker X must be 100cm3 even though visual indicators will not show this due to the displacement of water by marbles
How can you find the volume of a rock that is too big to fit into a graduated cylinder?
One way to find the volume of a large rock is to use the water displacement method. Fill a container with a known volume of water, then carefully lower the rock into the water. Measure the change in water level to determine the volume of the rock.
How do you measure a stone with a beaker?
To measure a stone using a beaker, first fill the beaker with water to a known volume. Then, carefully add the stone to the water and measure the new volume of water, also known as the displacement volume. The difference in volume between the two measurements will give you the volume of the stone.
What tool do you use to measure the volume of a shell?
A beaker of water. Fill the beaker to a certain point, put the fossil in the water and see how many ml the water goes up to. The difference between the original fill line and the fill line after dropping the fossil in is the volume in ml.
What lab equipment is most useful in finding the denisty of an object?
A scale, a beaker and a graduated cylinder. You use the scale to determine the mass of the object. If it is a solid, you can just place it on the scale. If it is a liquid you have to keep it in a graduated cylinder or beaker and weigh it. But remember to subtract the weight of the beaker/graduated cylinder. Then you have to find the volume. For a liquid, this is very easy. Just put it into a graduated cylinder and read the ml on the side. If it's a solid, then there are two ways to do it. If it is a very even shape, such as a cube or a cylinder etc, you can take precise measurements and use the volume equations available for the certain shape. Another way is to do water displacement. Put water into the beaker and record the volume. Then put the solid in the water (make sure the solid doesn't dissolve in water first). Record the volume and subtract the original volume. The density is just mass divided by volume.
How do you find the volume of a beaker?
Fill the beaker with water, then pour it into a calibrated measuring jug
Beaker X contains 50cm3 of marbles while Beaker Y contains 100cm3 of water. When all the water in Beaker Y is poured into Beaker X what is the volume of the water in Beaker X?
The volume of the water in Beaker X will be 100cm3, as you are not adding any more water to the equation (50X+100Y is not 150Y or X, but 50X+100Y) The total volume of matter in Beaker X will be 150cm3, and if the beaker is labelled, the volume measure will indicate 150cm3 due to the displacement of water. But as the answer to your question, the volume of water in Beaker X must be 100cm3 even though visual indicators will not show this due to the displacement of water by marbles
How you find the volume of an irregularly shaped of aluminum?
The easiest way is to place the object in a graduated beaker of water, and see how much the water rises when you put it in. Archimedes Principle says that the volume of the object is the same as the water displaced from the beaker.
How can you find the volume of a rock that is too big to fit into a graduated cylinder?
One way to find the volume of a large rock is to use the water displacement method. Fill a container with a known volume of water, then carefully lower the rock into the water. Measure the change in water level to determine the volume of the rock.
How do you measure a stone with a beaker?
To measure a stone using a beaker, first fill the beaker with water to a known volume. Then, carefully add the stone to the water and measure the new volume of water, also known as the displacement volume. The difference in volume between the two measurements will give you the volume of the stone.
How do you use an overflow container to find an object volume?
To find the volume of an object, we use an overflow cylinder as it gives a measure of the volume of the object by displacing an equal amount of water into the beaker.
Are there more particles in a beaker with a large amount of water in it or a beaker with a small amount of water in it?
There are more particles in the beaker with a large amount of water compared to a beaker with a small amount of water, assuming the water is the only substance present. This is because the volume of water in the larger beaker contains more individual water molecules than the volume of water in the smaller beaker.
What happens to the volume of a beaker when ice melts in it?
The volume of a beaker doesn't change, it's a beaker. What your were probably trying to ask is what happens to the volume of the ice when it melts. The volume decreases; water is special. Unlike other substances when it freezes it expands. That is why ice floats, it is less dense then water.
How can get the volume of solid irregular shapes?
REQUIREMENT: stone(volume to be measured), a beaker, thread, water.PROCEDURE: 1. Take water in a beaker half liter or a liter of water.2. Take another beaker with water and put into stone for half hour.3. Now tied the stone with thread and put in in step 1 beaker,the increased volume in beaker is your stone volume.Thanks.
If a beaker had 160 liters of water what is the volume?
Liters is a measurement of volume. 160 Liters is the volume.
What method is to find the volume of a irregularly shape?
Depending on the size of the object this can be difficult. For a large object, lime a mountain, say, you have no option but to estimate. For smaller objects use a large beaker, and fill it with a liquid in which your shape is not soluble. Measure the volume of liquid in the beaker. Then place the object into the water and make sure it is totally submerged. The volume of the water in the beaker will rise and the volume of the shape is the difference between the two measures.
How do you f ind volume of an object using water displacement method?
Fill a market beaker to a specific measured volume. (Eg. 50cm cubed, make sure you have not filled the beaker with water). Now place the object in the beaker with water. The water level should rise (Eg. from 50cm cubed to 60cm cubed). The difference in the original volume and the final volume is the volume of the object. That is the water displacement method.
