1 meter high, 1 meter wide, 2 meters long. The tank is only half full of water.
You would use the metric unit "liters" to measure the capacity of a hot water tank.
The Letters "WC" on a propane tank stand for "Water Capacity", and are followed by a number which would identify the tanks Water Capacity typically measured in lbs. Water weighs approximately 8.3lbs per gallon Propane weighs approximately 4.24lbs per gallon
most fish tanks are measured in gallons unless it is more of a small fish bowl instead
Assume liquid propane has a specific gravity of .51. For a liquid with that property DOT regulations say that for tanks under 1200 gallons, the maximum permitted filling density of the tank is 42% of the water weight capacity. Assume water weighs 8.33 lbs/gal. 285 x 8.33 = 2374 lbs capacity. 2374 x .42 = 997 lbs.
Propane tanks are rated for water capacity because it helps determine the tank's overall volume and its ability to safely store propane gas under pressure. Water capacity is used as a standard unit of measure in the propane industry for consistency and safety regulations.
Litres.
This tank has a maximum capacity of 50,550 liters of water.
That's not a very good question. If your saying What is the capacity of "ANY" water tank I can say 1'000'000'000'000'000'000 If i want.
To calculate the loading capacity of the buoyancy tank float in sea water, you need to consider the buoyancy force acting on the tank. This force is equal to the weight of the water displaced by the tank. You can use the formula: Buoyancy Force = Volume of the tank x Density of sea water x Gravity. With the given dimensions, you can calculate the volume of the tank and use the density of sea water (around 1025 kg/m^3) to find the loading capacity.
You can find the fuel tank capacity of a 1992 Mitsubishi Montero by checking the owners manual. It will explain the capacity and location of your fuel tank.
Capacity = 5*5*3 = 75 m3 = 75,000 litres.
what is the cost of sintex storage water triple layer tank of capacity 1000litre
244.78 gallons
It depends on what sort of decoration you are using in the tank and where the water level comes to. If the tank is heavily decorated and only 3/4 full, you might find that only 75% of the total capacity is used. If it is full and lightly decorated it may be more than 95% total capacity. The best way to tell is to use a bucket of known volume to fill the tank. Multiply the volume of the bucket by the number of times you emptied it into the tank to find the amount of water that is in the tank.
That depends on the extra height of your tank, its capacity and the bore of your piping.
You would use the metric unit "liters" to measure the capacity of a hot water tank.
195: 60% = 0.60; (0.60)(325) = 195.