I had a problem with a noisy hunter fan last month. After going to similar post like this one, I found this site www.fanshack.com and ordered a bottle of fan motor oil (I know it sounds funny) but it cleared it right up. I couldn't find this oil at lowes or Home Depot for the life of me. Anyways, try these people out they also helped me pickout a nice light kit for my fan too. Hope this helped.
AnswerIf it has a light, make sure the nut holding the diffuser holds it so that it won't rattle. AnswerMy Hunter ceiling fan developed a scratching sound after about 6 months of use. I checked all screws blades etc. Finally I removed the housing to expose the motor. It was then that I noticed a piece of mesh had become unglued and the rotors where rubbing against it. Problem solved. Answerglue pennies to the blades! If there is a imbalance in the fan this will clear it right up. that is until the pennies fly off and break stuff! Believe it or not, I actually saw a friend do this. AnswerIT ALL DEPENDS ON WHAT IS CAUSING THE NOISE. IF THE FAN IS OUT OF BALANCE GO TO YOUR NEAREST FAN DISTRIBUTER AND BUY A REAL BALANCING KIT AND FOLLOW THE DIRECTIONS.IF IT IS NOISE FROM THE MOTOR AND YOU ARE NOT A QUALIFIED ELECTRICIAN, YOU SHOULD CALL A PROFESSIONAL WHO CAN COME AND LISTEN TO THE FAN AND DETERMINE WHAT STEP TO TAKE NEXT. Answeryou may also want to check the light bulbs and other glass fixtures on the fan/lamp (if there are lights). Sometimes they aren't seated properly on the rubber seals or screws that hold them together and they rattle and make other noise. Answerthe above is GREAT advice- often it sounds like the motor, but it's just a light bulb rattling on the glass in the light kit, or a loose screw.Matt
AnswerAs Stated In The Ceiling Fans Manuals, Turn The Ceiling Fan Off For 24 HRS. Then Turn It On. If It Proceeds, Check All Screws. If It Proceeds, Check The Lights, If There Are Any. If It Proceeds, Check That The Pulls Are Not On The Lights, If There Are Any. If They Are, Remove Them. If It Proceeds, Remove The Ceiling Fan Itself, Replace It. Answerreplacement AnswerIn most cases when your ceiling fan makes noise, it's is off balanced.I have found this on http://www.ceiling-fan-wizard.com/noisy-ceiling-fan.HTML
This is usually due to the fan blades; and this is probably the easiest problem to fix once you find the blade that is off. It can also be a production fault, but this is exceptional.
Answer
My fan made a noise only when the switch was on. As soon as the switch was off the noise stopped, even though the fan still continued to turn. I tried reversing the direction, but still got exactly the same effect (switch off + fan turning = no noise; switch on + fan turning = noise). So I was sure it was an electrical problem.
But when I started to dismantle the fan, one out of the eight screws holding the blades was a little loose. Tightened screw, problem solved (and the night before we had almost bought a new fan!)
IF YOU RECENTLY CLEANED OR REMOVED BLADES FOR ANY REASON YOU LOST ONE OF THE WASHERS FOR A SCREW. THESE FANS ARE SO BALANCED THAT A 1/4OZ WASHER WILL THROW IT OFF. i CAN'T TELL YOU HOW MUCH MONET i MADE AS A HANDYMAN FIXING THIOS PROBLEM.
you fix the light on the ceiling fan by puting a new light bulb in your fan
Be certain to observe the exact same polarity as the old one. A capacitor does have plus and minus leads. Should an old defective ceiling fan transformer be replaced by a capacitor?
You may have a bad switch with contacts that are very close together, which may inadvertently touch each other, closing the circuit and turning the fan on. Calling an electrician may be in order. He or she will be able to trouble shoot the exact cause and fix it safely.
If the fan is not moving and emits a noise there are two possibilities. The bearings have ceased or the capacitor in the fan that starts the fan rotation have burned out. Both conditions are repairable. Take the fan apart and lubricate the bearings. If it is the capacitor there are many places on the web where these devices can be bought.
The only way that this could happen is if the switch is a change-over/two-way switch or a switch to a lamp/light. When you switch on, you are short-circuiting the mains. Probably, educated guess, you need to wire the fan across two other terminals if it is two-way, or you need to wire it in to the ceiling rose of the lamp, not the switch. The problem with switches in lighting circuits is that the wires to the switch are not positive and negative, they are usually both positive - one from the supply, one to the lamp. Unless the current drain to the fan is huge - unlikely.
To fix a noisy bathroom fan, you can try cleaning the fan blades and housing to remove any dust or debris that may be causing the noise. You can also check if the fan is properly secured to the ceiling or wall, as loose mounting can cause vibrations and noise. If these steps do not resolve the issue, you may need to replace the fan motor or the entire fan unit.
you fix the light on the ceiling fan by puting a new light bulb in your fan
Your ceiling fan may have stopped spinning due to a faulty motor, a broken fan blade, a loose connection, or a problem with the fan's capacitor. It is recommended to check these components and consult a professional if needed to diagnose and fix the issue.
To fix a ceiling fan that won't spin, first check if the fan is receiving power. If it is, try tightening the screws and ensuring the blades are not obstructed. If the issue persists, the motor or capacitor may need to be replaced. It is recommended to consult a professional electrician for further assistance.
Your ceiling fan may not be turning on even though it has power due to a faulty switch, a broken motor, or a problem with the wiring. It is recommended to check these components and consult a professional if needed to diagnose and fix the issue.
There could be several reasons why your ceiling fan is not working, such as a blown fuse, a faulty motor, or a problem with the wiring. To fix it, you can start by checking the fuse, ensuring the power is on, and inspecting the wiring for any damage. If these steps don't solve the issue, you may need to call a professional electrician to diagnose and repair the problem.
To fix your ceiling fan, you can try the following troubleshooting steps: Check the power source to ensure the fan is receiving electricity. Inspect the fan blades for any obstructions or debris that may be causing it to malfunction. Tighten any loose screws or connections in the fan assembly. Test the fan's pull chain or remote control to see if it is functioning properly. If the fan is making unusual noises, lubricate the motor and bearings. If none of these steps work, consider contacting a professional electrician or ceiling fan repair service for further assistance.
There could be several reasons why your ceiling fan is not turning on when you use the wall switch. It could be due to a faulty switch, a problem with the fan's wiring, a blown fuse, or a malfunctioning motor. It is recommended to check these components and consult a professional electrician if needed to diagnose and fix the issue.
To fix a wobbling ceiling fan, first make sure all the blades are securely attached. Use a balancing kit to adjust the blades if needed. Check that the fan is securely mounted to the ceiling and that the downrod is straight. If the issue persists, consider calling a professional for further assistance.
1) clean the ball-bearings 2) change the capacitor 3) clean the blades 4) lubricate the ball-bearings that will do the job, if not then there is problem with the motor.
To fix a broken ceiling fan string, you can try to reattach or replace the string. If that doesn't work, you may need to contact a professional electrician to repair or replace the fan.
Your ac/heater blower motor may be going out, located below the glove box compartment.See "Related Questions" below for more about this easy do-it-yourself repair.