Try a product called Brasso. The marines use it so should you.
The color green is not commonly used for receptacle terminal screws. Brass and silver are typical colors for the screws, while black is often used for the insulating coating of the screw.
The brass screw is for the hot connection, usually the black wire.; sometimes a red one. The silver colored screw is for the white wire or neutral. If there is a green screw, it's for the ground, usually a bare wire but may also be green.
Applying tamarind juice on a brass lamp is a common practice to restore its shine and clean off tarnish. The acidic nature of tamarind helps to remove dirt, grime, and oxidation from the brass surface, restoring its luster and original color.
green. The green is the only color not absorbed and therefor bounces off the shoe creating a green appearance
Brass mimics gold in appearance due to its yellowish color and luster.
Blue and Green depending on the intensity of the heat.
To achieve a brass color, mix yellow and orange hues with a touch of brown or gold. You can also add a hint of red or green to adjust the tone of the brass color as needed. Experimentation with different ratios of these colors will help you achieve the desired brass shade.
The color green is not commonly used for receptacle terminal screws. Brass and silver are typical colors for the screws, while black is often used for the insulating coating of the screw.
on the thermostat housing it is a brass color i think green plug
Brass does not rust because it is an alloy of copper and zinc. However, over time, it can develop a patina or tarnish that gives it a dull, brownish appearance.
green colours are signal to run . Eg., traffic lights
green
REALLY cheap rings were (at one time) a thin gold wash over a base metal of brass. The gold wash would wear through almost at once, leaving the brass exposed. Brass leaves a trace of green color on the skin.
Off yellow or green yellow.
Green
Copper gives off a green flame when burned. So, green.
green