answersLogoWhite

0

If you are speaking of the inner c.v. joint for one of the front axles there is an internal snap ring that has to bee removed to get this joint out,just slide the c.v. boot back and look at the inner edge of what the joint slides in to and you can see it.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Where is the fuel filter located on a 1996 Honda Passport?

The fuel filter on a 1996 Honda Passport is located underneath the vehicle close to the gas tank. The filter will have bolts holding it in.


How do you remove the oil filter on a 1996 Honda passport?

Turn it counterclockwise.


1996 Honda Passport heater blower doesn't work?

Buy a Toyota


Show location of coolant temp sensor on a 1996 Honda passport?

The location of the coolant temperature on the 1996 Honda Passport is actually behind the alternator. You can see the sensor in any Haynes or Chilton's manual for that vehicle year.


Where can you get a diagram for a 3.2L V6 motor for a 1996 Honda Passport?

A diagram for a 3.2L V6 motor for a 1996 Honda Passport can be ordered from any Honda dealership. You will want to check with your local dealer and see if they can get you one free of charge or if there is a fee. They may even have one that you can borrow.


Location of starter on Honda Passport 1996?

Look at the lower rear end of the engine


What type of oil for a 1996 Honda passport?

SAE 5w-30 any major brand.


What size engine was used in 1996 Honda Passport?

it's a 30l, with a dual over head cam...


How would i find an owners manual for a 1996 Honda Passport?

i want to print a free owners manual


Where is the starter located on a 1996 Honda Passport?

Follow the red battery cable down from the battery to the starter.


Where is the transmission dipstick located on a 1996 Honda Passport?

doesnt have one it is a sealed non serviceable unit


Where is the drain cock on a 1996 Honda passport?

Should be at the bottom or rear of the radiator or remove lower radiator hose