To power off the Orbit Sprinkler Timer, you can unplug it from the power source or shut off the circuit breaker supplying power to it. To power it on, simply plug it back in or turn on the circuit breaker.
There are some type of timers that can be locked into the off or on position. Flick the power to the timer off and then on within 10 seconds. If the lights come on do nothing. The daylight photo cell will shut them off automatically. If the timer is not that type then state more detail on the discussion page.
First you need to decide what you are trying to accomplish. You can wire the Timer switch in series with or parallel to the 3-way switches. If in series then the 3-way switch function would depend on the timer state. If the Timer switch was ON then the 3-way switch could turn the connected device ON or OFF from either location. If the Timer switch were OFF the device would be OFF no matter what you did with 3-way switches. To wire in this fashion put the timer between the supply and the input to the switches. If the Timer is in parallel then if the Timer is ON it doesn't matter what you do with the 3-way switch, the device will be ON as long as the Timer is ON. If the Timer is OFF then the 3-way switches will work in their normal fashion. To wire in parallel connect the supply to one side of the Timer and the device to the other.
A household timer typically uses a very small amount of power when the device is turned off, usually less than 1 watt. This power is often used to maintain the internal clock and standby mode.
Timer relays are used in control circuitry. There are two main types, an (off delay) and an (on delay). If you want one device to turn off before the timer controlled device then you would use an off delay timer. If you want one device to turn on before the timer controlled device then you would use an on delay timer. When the timer is energized this starts the timer circuit in the relay to time out.
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
Yes, an electrical timer can be used to control the on and off operation of the power to self ballast lamps.
it means you left the power on too long
To turn off a sprinkler head, locate the main water valve that controls the sprinkler system and turn it to the "off" position. This will stop the flow of water to the sprinkler heads, effectively turning them off.
call a plumber
with an ON delay timer once the power has been appied to the timer unit, the timer contacts will change state-open/close after a preset time (for example A&B timers are adjustable anywhere from 0.05 seconds to 300 Hours) with a OFF delay these contacts change state after the power to the unit has been removed then the preset time will time out (this count dosen't start until the power is removed
To set up a wall timer for lights in your home, first turn off the power to the light switch at the circuit breaker. Remove the existing switch and install the wall timer in its place according to the manufacturer's instructions. Program the timer to turn the lights on and off at your desired times. Restore power at the circuit breaker and test the timer to ensure it is working correctly.
There are some type of timers that can be locked into the off or on position. Flick the power to the timer off and then on within 10 seconds. If the lights come on do nothing. The daylight photo cell will shut them off automatically. If the timer is not that type then state more detail on the discussion page.
To install a timer switch for your bathroom fan, first turn off the power to the fan at the circuit breaker. Remove the existing switch and connect the timer switch according to the manufacturer's instructions. Mount the timer switch in place of the old switch and restore power to test its functionality.
Sprinkler irrigation systems irrigate (water) crops/plants. If it is automated with a timer, sprinkler irrigation systems can be turned on and off at different times of the day. Places you'd find automated sprinklers: Parks, golf courses, landscapes, etc. Sprinkler irrigation systems can also be found on farms in several different formats, including pivot systems, pipes laid through fields (hand-lines), and wheel-lines.
To cap off a sprinkler head effectively, you can use a sprinkler head cap or plug that fits securely over the head. Make sure to turn off the water supply to the sprinkler system before capping the head to prevent leaks.
with a home lamp timer
A modern X-ray machine is turned on-and-off by a timer-operated electrical switch. The power is turned on when the operator presses a start button and is turned off automatically by the timer. This is done to reduce the likelihood of operator error.