0
What else can I help you with?
If linked 48 volt system using 12 volts charge?
You can link them in series, that is hook the positive from one battery to the negative of the other battery. Then hook the load + to the last battery, and the load - to the first battery. It doesn't matter which one you use as first and last. All batteries need to contain an even charge. +-+-+-+- Here is a website for more information http://www.zbattery.com/Connecting-Batteries-in-Series-or-Parallel:
Can you use a 12 volt battery on a 6 volt system?
Sure you can. But consider what could happen if you did. If precision of time or speed was built into this 6-volt system, a 12-volt battery will make it work faster until something shorts or burns out. If you need more lasting power for the 6 volt system, you should consider putting two 6-volt batteries in parallel to power your 6-volt system.
Low voltage lights equivalent to 110 volt lights in watts?
To convert low voltage lights (e.g. 12 volts) to wattage equivalent to 110 volt lights, you would divide the voltage by 10. For example, 50 watts in a 110 volt system would be equivalent to a 5 watt bulb in a 12 volt system.
Can you replace a 14 volt battery with an 11 volt battery?
It is not recommended to replace a 14 volt battery with an 11 volt battery as the voltage difference may affect the performance of the device. It is important to use the correct voltage battery specified by the manufacturer to prevent damage to the device.
Can you charge a 6 volt battery with a 12 volt battery charger on slow 2amp charge?
It is not recommended to charge a 6 volt battery with a 12 volt battery charger as it can damage the battery. The higher voltage can overcharge the battery and cause it to overheat. It is important to use the correct charger with the matching voltage to prevent damage to the battery.
How do you hook up a 12 volt battery charger to a 24 volt system?
Separate the 2 12 volt batteries and charge them individually.
Can you hook up a 12 volt light to a 33cc scooter?
Yes, if you have a 12 volt battery and/or a charging system to support it.
Can you hook a tattoo gun to a 9 volt battery?
Yes
How do you hook up 2 12 volt lights to a 24 volt system?
To hook up two 12-volt lights to a 24-volt system, connect the lights in series. This means connecting the positive terminal of the first light to the negative terminal of the second light, and then connecting the remaining terminals to the 24-volt power source. This configuration will ensure that each light receives the necessary 12 volts, as they will share the total voltage from the power source. Always ensure that the lights are rated for use with the appropriate voltage to avoid damage.
How do you jump start a dual battery diesel?
If it is a twelve volt system then you probably need to hook up two jumper cables one to each if it is really dead. if not just hook up the battery on the driver side.
Do you need a voltage regulator if you hook up a 12 volt light to a 24 volt system?
Hook a 12 volt light to a 24 volt system and the light will burn out in seconds. You need a step-down voltage converter to do this.
Can you use a 36 volt battery on a 24 volt system?
No.
How do you turn a head unit on without a car?
Get a charged 12 volt battery hook 12 volt constant/RED to the + on the battery then ground - it should power up.
Can a 36 volt battery charger charge a 48 volt system?
No.
How do you hook up a battery charger to charge a 24 volt system?
Most 24 volt systems use 2 or 4 12 volt batteries. Be careful not to let the cables get mixed up. They need to be put back in the same spot. Disconnect the battery, Charge each battery individually, Reconnect the cables exactly like they were before. You are ready for work.
How do i wire two 12 volt car batteries to make one 24 volt battery?
To get 24 volts from two 12 volt batteries, hook the positive post from one battery to the negative post of the other.
How do you hook up a battery charger on a 1935 ford pickup?
The first thing you need to know is if the truck is still the original six volt system or not. The charger is still hooked pos to pos, neg to neg regardless of whether it is pos or neg ground. Do not use a twelve volt charger on a six volt battery.
