answersLogoWhite

0

I can probably answer this question but to do so I need more info; switchleg from where another light? And why are you switching it again? or are you adding a light? Respond to my message page and I'll try to answer it further. I am hooking up a light fixture in an add on closet. I am feeding from the light in the bedroom, and I want to control the closet light from a switch just out side the closet door.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do you hook up an overhead light in the kitchen to a two way switch?

To hook up an overhead light in the kitchen to a two-way switch, you will need to run a 3-wire cable between the light fixture and the two switches. Connect the black wire of the cable to the light fixture, the white wire to the neutral wires, and the red wire to the two switches. At the switches, connect the red wire to the common terminals and the black and white wires to the traveler terminals.


Diagram of one light and three single switches?

I'm unable to provide visual content as a text-based assistant. However, you can imagine a diagram with a single light and three single switches arranged as follows: A single switch at the entrance, another single switch at the exit, and a third single switch at another location in the room. Each switch controls the same light fixture.


How does a single pole switch differ from a three way?

A proper "3-way switch" would be capable of being switched to 3 different positions and could have one, two or more poles. Each pole could be either single- or double-throw."How does a single pole switch differ from a three way?" is a trick question often asked to catch-out new trainee electricians because the common but mis-named "three-way switch" is actually a single pole, double throw switch, i.e. it is only a 2-way switch, not a 3-way switch.A pair of "3-terminal, single pole, double throw" switches are often used to hook-up two separate light switches to control one light or one set of lights.The same answer put in a different wayDespite the fact that the name "3-way switch" is often used to describe it, if it is of the type that has just one pole that can only be physically switched 2 ways, the name "3-way switch" is quite wrong for that particular switch. A "3-terminal, single pole, double throw" switch" is a more accurate description for it.


How do you wirelessly hook up a lamp to a single pole switch?

You can use a wireless smart plug or a Wi-Fi enabled smart light bulb to control the lamp wirelessly. Simply plug the lamp into the smart plug or screw in the smart light bulb, then connect the device to your smartphone or smart home system to control it remotely. This eliminates the need for rewiring a single pole switch for wireless control.


How do you wire 2light switchs to one light fixture?

for USA, Canada and countries running a 60 Hz power supply service.For information on how to hook-up one light with two on-off switches, see the Related link "How to wire 3-way and 4-way switches, including wiring diagrams", shown below. When using the correct size wire, there are several possible configurations of power connection, lighting outlet, and the two 3-way switches. Power can come from the panel to one switch or the other, or to the light, whichever is convenient. The light can be physically positioned between the switches or at the end of the two-switch series.Each configuration requires different handling of the hot, switched travelers, and neutral wires. In every case, there are runs that require three parallel conductors, whether for neutral, hot or travelers, not including any grounding wires. A 3-wire cable is highly recommended for this application.If there are more than two switch locations, a 4-way switch goes between the 3-way switches to crossover the two travelers. Two 3-conductor cables are used for this portion, including a bypass connection for the un-switched hot. Asking this question shows you are probably not quite ready to take on this particular task.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.

Related Questions

How do you get the dome light working in a 07 dodge Charger police car with doors switches disabled?

hook the wires back up to the door switches, they probably just disconnected them.


How do you hook up an overhead light in the kitchen to a two way switch?

To hook up an overhead light in the kitchen to a two-way switch, you will need to run a 3-wire cable between the light fixture and the two switches. Connect the black wire of the cable to the light fixture, the white wire to the neutral wires, and the red wire to the two switches. At the switches, connect the red wire to the common terminals and the black and white wires to the traveler terminals.


How do you hook up a 4-way switch in a circuit?

To hook up a 4-way switch in a circuit, you need to connect the four terminals on the switch to the corresponding wires in the circuit. This type of switch is used in conjunction with two 3-way switches to control a single light fixture from multiple locations. It is important to follow the wiring diagram provided with the switch to ensure proper installation.


How do you hook up a 3-way switch in a circuit?

To hook up a 3-way switch in a circuit, you need to connect the common terminal of one switch to the power source, the common terminal of the other switch to the light fixture, and the travelers of both switches together. This allows you to control the light from two different locations.


When was Sandy Hook Light created?

Sandy Hook Light was created in 1764.


Diagram of one light and three single switches?

I'm unable to provide visual content as a text-based assistant. However, you can imagine a diagram with a single light and three single switches arranged as follows: A single switch at the entrance, another single switch at the exit, and a third single switch at another location in the room. Each switch controls the same light fixture.


Can you connect four switches to one Router?

Yes. Just connect one switch strait into the router. Then hook the other three switches into the first switch. -DJ Craig


How does a single pole switch differ from a three way?

A proper "3-way switch" would be capable of being switched to 3 different positions and could have one, two or more poles. Each pole could be either single- or double-throw."How does a single pole switch differ from a three way?" is a trick question often asked to catch-out new trainee electricians because the common but mis-named "three-way switch" is actually a single pole, double throw switch, i.e. it is only a 2-way switch, not a 3-way switch.A pair of "3-terminal, single pole, double throw" switches are often used to hook-up two separate light switches to control one light or one set of lights.The same answer put in a different wayDespite the fact that the name "3-way switch" is often used to describe it, if it is of the type that has just one pole that can only be physically switched 2 ways, the name "3-way switch" is quite wrong for that particular switch. A "3-terminal, single pole, double throw" switch" is a more accurate description for it.


What is the best size hook to use for single crochet?

it is best to use an H or I size hook


How can I create a DIY hanging light fixture for my home?

To create a DIY hanging light fixture for your home, you can start by gathering materials such as a pendant light kit, a light bulb, a decorative lampshade, and a ceiling hook. Follow the instructions provided with the pendant light kit to assemble the fixture. Then, attach the lampshade to the fixture and hang it from the ceiling using the ceiling hook. Make sure to follow all safety precautions and consult online tutorials for additional guidance.


How do you hook up led lights to turn on when you turn the light on in a car?

you hook it in the trunk


How do you wirelessly hook up a lamp to a single pole switch?

You can use a wireless smart plug or a Wi-Fi enabled smart light bulb to control the lamp wirelessly. Simply plug the lamp into the smart plug or screw in the smart light bulb, then connect the device to your smartphone or smart home system to control it remotely. This eliminates the need for rewiring a single pole switch for wireless control.