0
What else can I help you with?
What must be done to determine the concentration of a non standard solution?
Titrate it with a primary standard
What is the end point when aluminium fluoride solution is titrated against thorium nitrate solution?
I don't know, I suppose we have to ask a chemist.
How can we prepare 1M solution of NaCl?
You could titrate equal volumes of 1M solution of NaOH and 1M solution of HCl to obtain 1M solution of NaCl.
In a titration what two things are always equal to each other at the endpoint?
In a titration, the moles of the titrant added are equal to the moles of the analyte in the solution at the endpoint. This equality is essential for determining the concentration of the analyte in the solution.
Why titrate a flask?
Titration is a common laboratory technique used to determine the concentration of a substance in a solution. By carefully adding a titrant (a solution of known concentration) to the solution being analyzed until the reaction reaches an endpoint, the exact amount of substance in the solution can be quantified. Titrating in a flask allows for controlled mixing and easy observation of color changes or other indicators.
What primary standard is used to titrate against potassium hydroxide?
The primary standard commonly used to titrate against potassium hydroxide is potassium hydrogen phthalate (KHP). It is a stable compound with a well-defined molar mass, making it suitable for accurately determining the concentration of a solution of potassium hydroxide.
How we standrise sodium carbonate solution?
Titrate it with a standard base.
What is titrate?
Titrate is a process used in chemistry to determine the concentration of a substance in a solution. It involves slowly adding a solution of known concentration (titrant) to another solution until a reaction is complete, allowing the concentration of the unknown substance to be calculated.
Calculating molarity and factor of HCl and Borax solutions in standidization?
To calculate the molarity of HCl solution, you would first titrate it against a known concentration of a base (e.g., NaOH) and use the stoichiometry of the reaction to determine the molarity of the HCl. The factor for the HCl solution would be the ratio between the molarity determined experimentally and the intended molarity. For the borax solution, you would titrate it against a standardized HCl solution to determine its molarity. The factor for the borax solution would similarly be the ratio of the experimental molarity to the intended molarity of the borax solution.
What is the chloride test procedure for waste water?
titrate with mercuric nitrate solution
What must be done to determine the concentration of a non standard solution?
Titrate it with a primary standard
What is the molarity of an HCl solution if 43.6 mL of a 0.125 M KOH solution are needed to titrate a 25.0 mL sample of the acid according to the equation below?
What is the molarity of an HCl solution if 43.6 mL of a 0.125 M KOH solution are needed to titrate a 25.0 mL sample of the acid according to the equation below?
How do you standardise 0.1M HCl?
To standardize 0.1 M HCl, you would first need to titrate it against a solution of known concentration, usually sodium hydroxide (NaOH). By carefully adding the NaOH solution to the HCl solution until the reaction is complete, you can determine the exact concentration of the HCl solution. This process allows you to adjust the concentration of the HCl solution to the desired 0.1 M.
How do you prepare buffer solution?
To prepare a buffer solution which may be acidic. Titrate ethanoic acid (weak acid) with sodium ethanoate(salt).
Which of the following might you use to titrate an oxalic acid solution?
You could use a standardized solution of potassium permanganate (KMnO4) to titrate an oxalic acid solution. Potassium permanganate is a strong oxidizing agent that reacts with oxalic acid in an acidic medium, forming carbon dioxide gas, manganese dioxide, and water.
How can you titrate with perchloric acid verses glacial acetic acd?
Since they are both acids, you don't usually titrate one against the other. If you want to titrate something, you should use one acid and one base. If one of them is a weak acid/base, the other should be a strong acid/base.So if you want to titrate a solution of acetic acid, use a solution of a known concentration of sodium hydroxide (NaOH) or potassium hydroxide (KOH) instead. You can also use either of those two strong bases to titrate a solution of perchloric acid.
How could you titrate an acid and alkali without the use of an indicator?
If the acid or alkali forms an insoluble salt, you could titrate it that way. For instance, suppose you had a solution of sulfuric acid of unknown concentration. You could add calcium hydroxide until the precipitate stops forming and determine the strength of the acid by the amount of base added. If both the acid and alkali are soluble, a pH meter can be used to measure the change in pH of the solution. Drawing the change of pH against volume titrated will thus give the endpoint of the reaction.
