In theory you could put masking tape on part of it and drill a hole through the tape... but the bulb may still shatter, because the inside is vacuum-sealed. (The pop you hear when a bulb shatters is the air rushing in to fill the vacuum.) The filament will also burn out sooner (if not right away) because there is now oxygen getting to it, and making it burn hotter when the bulb is lit. The best thing to do? DON'T TRY THIS AT HOME. Or at all.
2 sticks go in 1 hole.
No, hair is not used to make a light bulb. Light bulbs are typically made of glass or other transparent materials, with a filament made of tungsten or other metals that produce light when heated. Hair is not a suitable material for this purpose.
Both normal and colored light bulbs typically have the same energy consumption in terms of electricity when producing light. The difference lies in the design of the colored bulb that filters out certain light wavelengths to produce colored light, which can make it appear dimmer compared to a normal bulb of the same wattage.
Thomas Edison is widely credited with inventing the practical and commercially viable incandescent light bulb. He demonstrated the first successful light bulb in 1879 and his innovations helped make it a practical and widely used technology.
To make a lamp or light fitting light up, you typically use a light bulb or LED bulb. The electricity flows through the bulb's filament or semiconductor, causing it to emit light. This process is controlled by a switch that completes the electrical circuit when turned on.
A light bulb can make heat and light.
Only two, as long as the light bulb has a hole, large enough for them to enter!
Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb
Electricity + Glass = Light bulb
argon is an element that make up a light bulb
a regular light bulb-no.
argon is an element that make up a light bulb
argon is an element that make up a light bulb
the Sparks on the copper makes the wire on the light bulb makes the 9v light bulb turn on.
you can make a light bulb by holding alt + 20.
It would be difficult even with a micro bit they are fragile
2 sticks go in 1 hole.