3 sec
Distance. Absolute magnitude is a measure of the intrinsic brightness of a star, independent of its distance from Earth.
The metric system is used to measure distance in Brazil.
Use the scale given in the map. Measure the distance by tracing the road with a string. Then measure the string. eg.10 cm. This is the working to get the distance: scale given = 2 cm distance n cm. = 10 cm = 10/2 = 5 ans=The distance on actual ground is 5 km.
If the scale is 1 centimeter to 1 kilometer, then the actual distance represented by the scale distance would be 1 kilometer for every 1 centimeter on the map. This means that if you measure a distance of, say, 5 centimeters on the map using this scale, the actual distance in real life would be 5 kilometers.
Measure they key, typically found near one of the corners. And then measure it and see how many kilometers/miles it is then measure the distance from your starting point to finishing point and compare it to the key
When driving, you should always measure your following distance in seconds. A general rule of thumb is to maintain a following distance of at least 3-4 seconds between your vehicle and the one in front of you. This distance allows you enough time to react and brake safely in case of an emergency.
It depends on how long a distance you want to measure!
Seconds
You should always measure your following distance by car length. This will give yourself time to break when necessary without being close to the driver ahead of you.
car lengths
The question asks about the "following". In those circumstances would it be too much to expect that you make sure that there is something that is following?
Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.
The word that most likely means "a measure of distance around a specific area" based on Greek roots is "perimeter." The term is derived from the Greek words "peri" meaning "around" and "metron" meaning "measure."
Grams is basically a unit of measure for mass while cm is a unit of measure for distance. These are two different parameters and therefore, equation can not be made.
to measure sound from distance use decibels
TO MEASURE AND INDICATE SPEED AND DISTANCE .... 3.2 Errors in the indicated distance run,
When following large trucks, maintain at least a minimum of a ______ second following distance.