Obviously, you can't.
If you don't have a jigger/shot glass/measuring cup (or just don't want to mess around with one), you can estimate by pour time. Bartenders fit open liquor containers with spouts that control pour rate such that if you turn the bottle over while you count to three, as long as you always count at the same rate you'll always get about the same amount of alcohol. This is faster than actually measuring and reasonably accurate. If you watch a show like "Bar Rescue", often times the mixologist will be shown explaining to the bartenders how to make the new cocktails using pour times: "Pour tequila for a three-count, pour triple sec for a one-count, add the juice of a lime, shake and pour it over ice".
A measuring jug.========================Answer #2:That depends on whether you want to measure the water's volume,rate of flow, temperature, density, salinity, turbidity, resistivity, purity, etc.Each of those measurements requires a different instrument.
The basic metric unit of measure for measuring the capacity of a pitcher is liters (L).
You cannot. Millilitres are a measure of volume, milligrams are a measure of mass and unless you know the density of the substance that you are measuring out, the conversion is not valid.
There are many instruments to measure lengths. But selection of measuring device depends on the maximum length it can measure. For example a small ruler used in schools can measure maximum 15 centimeters (or 6 inches). Here is a list of some measuring devices for measuring length: 1. Ruler (also known as scale) max 30cm 2. Meter Rod (that used by tailors or cloth sellers), max 100 cm 3. Measuring Tape (used by surveying engineers) For measuring very large distances travelled, In vehicles, speedometers also have distance measuring display. Ships use knots for measuring nautical miles.
That would be a ruler, yardstick, or meterstick, depending on the system of measure you are using.
by weight
you count the rings inside the tree
depends how big it is
you can measure the angle of insolation by measuring the angle of the shadows that appear
Measuring the weight of any body requires a tool to measure it. A measurement without a tool is an estimate, not a measurement.Measuring the weight of an airplane without a measuring tool cannot be done.
When measuring an angle you have to measure the sides using a protractor.
yes
A millimeter is a length measuring unit, while a gallon is a volume measuring unit. So there is no relation between them
Exactly what measuring device? There are hundreds of "measuring devices" to measure different things.
use a measuring measure,like the one for clothes measuring
You can measure its volume with a measuring cup or measuring spoons. You can measure its weight with a food scale. You can measure its temperature with a thermometer.
Yes, but you should measure solids before measuring liquids. If you, for example, measure water before measuring flour, the flour will stick to the measuring cup.