CL200 is the class of the meter
240V is 240 volts
3W is 3 wire (hot 120v / hot 120v / neutral)
FM2S is the type of meter
Is this an Itron meter? The FM2S will tell you what features it has when you look at the datasheets.
impossible as cubic meter per hour is volume flow rate while psi is pressure unit.
Google has a feature where you can type in something like ".1 meter a sec to mph" into search and it will give you an answer directly. It's very useful.
Millimeters per minute x 0.06 = meters per hour
The package label indicating the lowest external radiation hazard would typically be the "White-I" label, which signifies that the package has a radiation level of less than 0.5 millirem per hour at one meter from the surface. This label indicates minimal risk to the public and is used for materials with very low levels of radioactivity. In contrast, Yellow-II and Yellow-III labels indicate higher levels of radiation.
The kilowatt hour (KWHr) measures electricity use.
convert 1bar to meter cube per hour
0.0002777 meter per second
You divide by 3600 - since an hour has 3600 seconds.
what do you mean by 5? an inverter just steps a voltage up from a lower voltage( i assume you are talking about a 12v to 240v inverter) 1:20 ratio. so with 100Ah at 12v you should get 240v at 5amps for 1 hour more batteries in parallel will increase this figure.
1 meter per second = 3.6 kilometers per hour
You can accomplish this by removing one lead from the back of the hour meter. It will be a DC voltage circuit.
1 meter per second = 3,600 meters per hour = 2.237miles per hour. (rounded)
You multiply by the number of feeds per meter and by the number of minutes per hour.
(1 mile/sec) x (3,600 sec/hour) x (1,609.344 meter/mile) = 5,793,638 meter/hour
it also depends on what meter you have, is it a KWH METER or a AH METER. IF ITS A KWH METER(KILO WATT HOUR) IT COUNTS IN WATTS (35w PER HOUR.)
There are 100cm in a meter and 3600 seconds in an hour.
cubic meter per hour