answersLogoWhite

0

If you don't know how to install light fixture, I don't recommend that you do it by yourself. The installation theory is actually very simple - all you need to do is attach fixture on the ceiling (or any other place) and then connect the electrical wires (usually there are two of them). After that it's good to put the light cover over the fixture to improve the appearance.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Natural Sciences

What is the ideal wattage for a dining room fixture?

A typical wattage range for a dining room fixture is between 200 to 400 watts. This will provide adequate lighting for the space without being too overpowering. Consider the size of the room and the ambiance you want to create when selecting the wattage for your dining room fixture.


Where is the best place to hang a ceiling fixture?

The best place to hang a ceiling fixture would depend on the room you are putting it in. For example in the dining room you would want to center it over your table. Living rooms and bedrooms usually will be in the center of the room.


How low should a light fixture hang in a living room?

A light fixture in a living room should typically hang 7-8 feet above the floor. This height ensures that the light source is not too close to the occupants' heads or obstructing their view, while still providing ample illumination for the room. Adjustments can be made based on the ceiling height and the size of the room.


How a room is lighted by just pushing an electric switch?

When an electric switch is pushed, it completes a circuit that allows electricity to flow to the light fixture in the room. The electricity energizes the light bulb, causing it to emit light. The light then illuminates the room, allowing you to see.


Can you convert an existing flush mount ceiling light into a recessed light?

Sure. Get a recessed light that is designed to be installed in "old Work". You must hav eenough room in ceiling to contain the recessed light. There may be some issues in some locations where the recessed fixture may overheat if for instance there is insulation around the fixture. Light should have an over temp cutoff. There should be a template with recessed light and a built in box to wire in the power from the old light. If you carefully cut out the sheetrock in ceiling according to the template dimensions, you will be able to use the piece you remove to repair the hole should there be no room for the recessed light. If there is attic access where the new light will be installed, you may be able to use a "new Work" light fixture since you can mount it from above. Go to someplace like Home Depot or Lowes and see what they have available.

Related Questions

Can you please replace the fan with a light fixture in the living room?

Could you switch out the fan in the living room for a light fixture instead?


What is the ideal wattage for a dining room fixture?

A typical wattage range for a dining room fixture is between 200 to 400 watts. This will provide adequate lighting for the space without being too overpowering. Consider the size of the room and the ambiance you want to create when selecting the wattage for your dining room fixture.


How can I replace a fan light fixture in my room?

To replace a fan light fixture in your room, first turn off the power to the fixture at the circuit breaker. Remove the old fixture by unscrewing it from the ceiling and disconnecting the wires. Install the new fixture by connecting the wires and securing it to the ceiling. Turn the power back on and test the new fixture to ensure it is working properly.


What type of lighting fixture would you recommend for the dining room?

A chandelier or pendant light would be a good choice for the dining room as they provide both ambient and task lighting, creating a warm and inviting atmosphere for meals.


What is the process for light fixture replacement in a room?

To replace a light fixture in a room, first turn off the power at the circuit breaker. Remove the old fixture by unscrewing it from the ceiling. Disconnect the wires and remove the mounting bracket. Install the new fixture by connecting the wires, securing the mounting bracket, and attaching the fixture. Turn the power back on and test the new light.


What are some creative ways to incorporate a glass bowl light fixture into a room's decor?

One creative way to incorporate a glass bowl light fixture into a room's decor is to hang it above a dining table as a statement piece. Another idea is to place it in a corner of the room to add a touch of elegance and ambiance. Additionally, you can use the glass bowl light fixture as a centerpiece on a coffee table or side table to create a focal point in the room.


What type of socket is required for the light fixture in the living room?

The light fixture in the living room requires a standard E26 socket.


What are the steps to install a wire light fixture in a room?

Turn off the power to the room at the circuit breaker. Remove the existing light fixture. Connect the wires from the new light fixture to the corresponding wires in the ceiling. Secure the light fixture to the ceiling. Turn the power back on and test the light fixture to ensure it is working properly.


What should I do if my flickering light fixture is causing a disturbance in the room?

If your flickering light fixture is causing a disturbance in the room, you should first try tightening the light bulb to ensure it is securely in place. If the flickering continues, you may need to replace the bulb or have an electrician check the wiring to resolve the issue.


What size light fixture should I choose for my room?

When choosing a light fixture for your room, consider the size of the room. For a standard 12x12 foot room, a light fixture around 24 inches in diameter is recommended. Larger rooms may require a bigger fixture, while smaller rooms may need a smaller one.


How do you install a pull cord light fixture in a room?

To install a pull cord light fixture in a room, first turn off the power to the room at the circuit breaker. Remove the existing light fixture and disconnect the wires. Install the new pull cord light fixture by connecting the wires according to the manufacturer's instructions. Secure the fixture to the ceiling and test it before turning the power back on.


How to install a light fixture in a room?

To install a light fixture in a room, first turn off the power to the circuit at the breaker box. Remove the old fixture, then connect the wires of the new fixture to the corresponding wires in the ceiling. Secure the fixture in place and attach the cover. Turn the power back on and test the light.