Pure iron filings will be attracted to a magnet; but pieces of iron carbonate will not.
Iron fillings can be separated with the help of a magnet.
1. Salt will dissolve in carbon disulphide 2. Now we have a mixture of iron filings sugar and carbon disulphide(salt dissolved in it) 3. Separate iron filings by magnet. 4. Remove the sugar by Decantation process. 5. Separate carbon disulphide and salt by distilation.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
What is special about iron filings? Anything with iron in it has this property... magnets are attracted to iron! Magnets do not attract sand. You can use a magnet to separate iron filings from sand.
U can separate salt and iron filings from each other by using a bigger magnet . There are other ways too . You can also put both of the mixture in a cup of water and watch as the salt evaporate or disappear . But the iron filings will come to the top . Or spreading the mixture on a table and using a magnet to separate them .
First, place the sulfur, sand and iron filings in a plastic container. Next, use a magnet to remove the iron filings from the sulfur-sand mixture and surely,the iron filings will connect to the magnet, leaving the sulfur and sand behind.
separate iron filings AND ash from water by filtration or evaporation then, if required, separate iron filings from ash by using a magnetic field,
Aluminum and iron can be differentiated because iron is magnetic and aluminum is not. To separate them, expose the filings to a magnetic source and the iron will separate.
Carbon disulfide can be used to separate a mixture of iron filings and sulfur. This is because carbon disulfide can be used to dissolve sulfur, thus leaving you with the iron filings.
With a magnet. Iron is ferromagnetic
you dont.
use a magnet
Use a magnet
we can separate it by magnetic separation..(use a magnet and iron gets separated)
because the iron can be picked up by a magnet
I would separate copper strands and iron filings by using a magnet. The iron is magnetic, but the copper is not, so the magnet picks up the iron, but leaves the copper behind.
Help me
A magnet.