answersLogoWhite

0

You would use a set of wire strippers made for stranded wire and proper size. If the strippers are made for stranded and solid make sure you use the size identifications for stranded not solid!

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Natural Sciences
Related Questions

How do you strip wire?

There is a wire stripper you can buy at a hardware store. It looks like pliers, but has a sharp inside edge that when the wire is put into it and held it will cut and strip the plastic off the wire.


How to cap off electrical wire properly?

To cap off electrical wire properly, strip the insulation, twist the exposed wires together, and secure them with a wire nut. Finally, wrap the connection with electrical tape for added protection.


How do you fix a broken wire for a speaker?

Couple options. Strip off a half inch of insulation of the wire were the wire is separated. The splice the wires together. Apply electrical tape to the area that the wires were spliced. Or, replace the whole wire. I recommend replacement.


What are the function of wire stripper pliers?

They are for stripping the insulation off electrical wire.


How do you recycle cable?

You can recycle cable by selling them to recycling centers or strip the insulation off with a tool like a wire cutter, a cable stripping machine etc. and sell the copper core in it.


How do you properly connect wires using a wire nut with pigtail?

To properly connect wires using a wire nut with pigtail, strip the insulation off the wires, twist them together, and then twist on the wire nut securely. Finally, attach the pigtail wire to the wire nut to create a secure and reliable connection.


What is the proper technique that wire strippers use to remove the insulation from electrical wires?

To remove insulation from electrical wires using wire strippers, place the wire in the appropriate gauge slot, squeeze the handles to cut through the insulation, and then pull the insulation off the wire. Be careful not to cut into the wire itself.


How to wire a plug socket correctly?

To wire a plug socket correctly, first turn off the power to the socket. Then, strip the insulation from the wires and connect the live wire to the brass terminal, the neutral wire to the silver terminal, and the ground wire to the green terminal. Finally, secure the wires in place and screw the socket cover back on.


Is it safe to breathe in the fumes from heated copper wire?

Hot copper wire gives off no fumes.However if you are talking about insulated copper wire, the insulation will give off fumes. Depending on the type of insulation it can be anywhere from totally safe to deadly!


What are wire strippers used for?

A simple manual wire stripper is a pair of opposing blades much like scissors or wire cutters. The addition of a center notch makes it easier to cut the insulation without cutting the wire. This type of wire stripper is used by rotating it around the insulation while applying pressure in order to make a cut around the insulation. Since the insulation is not bonded to the wire, it then pulls easily off the end. This is the most versatile type of wire stripper. Another type of manual wire stripper is very similar to the simple design previously mentioned, except this type has several notches of varying size. This allows the user to match the notch size to the wire size, thereby eliminating the need for twisting. Once the device is clamped on, the remainder of the wire can simply be pulled out, leaving the insulation behind.


What do you use to stripe wires?

I use a utility knife to strip the outer insulator off the wire and then I use a wire stripper to strip the insulator off individual wires. I cut the wire with lineman's pairs.


How do you wire a junction box?

To wire a junction box, first turn off the power to the circuit. Then, strip the insulation from the wires, connect the matching colors together using wire nuts, and secure the connections with electrical tape. Finally, place the wires back into the junction box and secure the box cover.