answersLogoWhite

0

To tie two ends of barbed wire together, you can use a piece of baling wire or strong metal ties. Make sure the wires overlap each other before twisting the baling wire tightly around both strands to secure them together. Additionally, crimping sleeves can also be used to connect barbed wire strands effectively.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

How two wire 2 light switch up in 1 box?

Tie all the white wires together under a wire nut and push them back in the box. Tie the black incoming power wire and outgoing power wire, if there is one, together under a wire nut with a black wire pigtail. Connect this pigtail to one screw on each light switch. Connect the black wire going up to the lights to the appropriate switch you wish to use to control that light.


Can I wire two ballasts together and use one power cable Do both ballasts have to be earthed if they are connected?

Yes, the two ballasts can be supplied with one power source. The two ballasts will be paralleled together. This means supply black (hot) to black on ballast one and black on ballast number two. Tie all three under a single wire nut. Connect the neutral conductors all together under one wire nut. Both ballasts should be tied to the ground wire that is in the supply cable. All of these connections must be made in an approved junction box.


Can you replace a short length of 14-2 wire with a 14-3 wire and just not use the red conductor?

Yes, you can replace a short length of 14-2 wire with 14-3 wire and not use the red conductor. Just cap off the red wire with a wire nut at both ends to ensure it is not accidentally connected to anything. Keep in mind that the unused red wire must still be properly terminated in electrical junction boxes.


Can you tie new dryer wire into old wire?

Yes, as long as the splice is made in a junction box that can have a cover attached to it and it must be accessable. This means its not to be covered with drywall. The wire must also be of the correct size and conductor count. For a dryer it is a 3 conductor #10 wire. The breaker size at the breaker panel is a two pole 30 amp.


How do you join stranded and solid wire in electrical wiring applications?

Depending on the size of the wire, you can use wire-nuts for the smaller gauges Do not twist solid and stranded wire together when you use wire-nuts. Just lay the exposed conductor side by side and apply the wire-nut. If you wrap the two wires together, it was found, some connections have pulled apart due to the wire-nut not biting into the solid wire as the stranded wire was wrapped around it. Split bolts for the larger sizes and Allen key wire lugs bolted together for big size wire.

Related Questions

What is the duration of Barb Wire film?

The duration of Barb Wire - film - is 1.63 hours.


When was Barb Wire - soundtrack - created?

Barb Wire - soundtrack - was created in 1996-04.


When was Barb Wire - film - created?

Barb Wire - film - was created on 1996-05-03.


What are the release dates for Barb Wire - 1922?

Barb Wire - 1922 was released on: USA: June 1922


What does tattoo ring of thorns on your arm mean?

Thorns or Barb Wire? Barb wire means you have been in prison


When was the invention of barb wire?

1860


What is the name of the wire that the germans used in the concentration camps?

barb wire


What does the Berlin wall have on top?

Barb wire


What did romans wipe their bum with?

with barb wire


How do I wire a new 3-way switch. I can't follow what my book says.?

you need the following wire should be 14-3 wire and two three way switches 14 -3 wire has 4wire in the bundle 1white 1black 1 copper and 1 of a different color this wire runs from switch to fixture to switch from power source tie copper wires together from source ( this is a ground )tie to fixture ground tie black wire together from source this should be the hot leg tie white wire together from source ( this is a Neutral) fourth wire runs from switch to switch wire nut together at fixture follow switch instructions all else fails call electrician


How do I wire a new 3-way switch. I can't follow what my book says?

you need the following wire should be 14-3 wire and two three way switches 14 -3 wire has 4wire in the bundle 1white 1black 1 copper and 1 of a different color this wire runs from switch to fixture to switch from power source tie copper wires together from source ( this is a ground )tie to fixture ground tie black wire together from source this should be the hot leg tie white wire together from source ( this is a Neutral) fourth wire runs from switch to switch wire nut together at fixture follow switch instructions all else fails call electrician


Did Joseph glidden invent barb wire in 1874?

No, he saw an exhibit of barb wire by Henry Rose. It was a single strand, but Glidden did improve on Rose's by using two strands of wire twisted together to hold the barbed spur wires in place. It was also well suited for mass production and by 1880 more than 80 million ponds of his wire was sold.