0
The density of each layer of the Earth generally increases with depth. The crust has the lowest density, composed mainly of lighter materials like silicates. Below the crust, the mantle has a higher density due to the presence of denser silicate minerals under high pressure. The core, primarily composed of iron and nickel, has the highest density, reflecting the extreme conditions and heavier elements found at that depth.
What else can I help you with?
Why is the density of water greater than the density of air given the same volume for each material?
The density of water is 1 g/cm3.The density of air is 0,001225 g/cm3.
The density of gold is 19.3 g cm3 The density of iron pyrite is 5.0 g cm3 If a nugget of iron pyrite and a nugget of gold each have a mass of 50 g what can you conclude about the volume of each nugget?
The nugget of gold has a volume of 2.6 cm3, and the nugget of pyrite has a volume of 10 cm3.
How do you Calculate the density of 820 g silicone occupying a 350 cm cubed container?
Density is calculated by dividing the mass of the substance by its volume. In this case, the density of the silicone can be found by dividing 820 g by 350 cm³. The density of the silicone in this scenario is approximately 2.34 g/cm³.
What element has the density of 3.0 g?
g is not a unit for density. g/cm3 is. At room temperature: Aluminum has a density of 2.7 g/cm3 Scandium 2.985 g/cm3 Bromine 3.1028 g/cm3 (liquid)
What is density volume of 125 mL and a mass of 200 g?
The density is calculated by dividing the mass by the volume. In this case, the density would be 1.6 g/mL (200 g / 125 mL).
Which layer on earths interior is the thinnest and What is the density of that layer?
The Earth's crust is the thinnest layer, ranging from about 5-70 km thick. The average density of the Earth's crust is around 2.7-3.0 g/cm³.
If a 68-g bar of gold is cut into 3 equal pieces how does the density of each piece compare to the density of the original gold bar?
The density of each piece remains the same as the density of the original gold bar. Density is a characteristic property of a material and does not change with size or shape. Thus, each new piece will have the same density as the original gold bar.
A 68-g bar of gold is cut into 3 equal pieces how does the density of each piece compare to the density of the original gold bar?
Exactly the same.
What is the density of the the inner core?
The density of the inner core is estimated to be between 12.8 -13.1 g/cm3, the most dense Earth layer.
Why is the density of water greater than the density of air given the same volume for each material?
The density of water is 1 g/cm3.The density of air is 0,001225 g/cm3.
Is it true that weight and size is used to measure density?
To calculate the density, find the mass and the volume. Mass divided by volume = Density. Each substance has a different density. Density is measured in g/cc (solids) or g/ml (liquids).
Is the bottom layer water or bromoform?
The lower layer is Bromoform, tribromomethane CHBr3 with the highest density (2.889 g/cm3), almost three times greater than of water.Trick:To simply find out if water is the lower or upper layer in a two-layer fluid system, you canadd carefully one drop of water at the top of the liquidwatch accurately the path of the falling drop and when it does 'dissolve'Then:when going down through the upper layer, then it will 'dissolve' in the lower, you may conclude the upper layer is NOT water. Orwhen 'dissolving' immediately in the upper layer then you'll conclude the upper layer is water.
What layer would a solid cube with 6-cm sides and a mass of 270 g float?
Volume of cube = 6^3 = 216 cm^3 Density of cube = 270 g / 216 cm^3 = 1.25 g cm^-3 This cube would not float in water as its density is greater than the density of water at 1 g cm^3
What has its own density?
Each material has its own density!Examples: Solid - water - noble gasCopper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3.Water has a density of 1000 kg/m3 = 1000 g/L = 1.000 kg/dm3 = 1.000 kg/L = 1.000 g/cm3 = 1.000 g/mL.Helium has a density of 0.1785 kg/m3 = 0.1785 g/L = 0.0001785 kg/dm3 = 0.0001785 kg/L =0.0001785 g/cm3 = 0.0001785 g/mL.
Robin has a block of material which measure 10 cm on each side. the block has a mass of 100 g. what is the density of the blocl?
To calculate the density of the block, use the formula: density = mass/volume. The volume of a cube with each side measuring 10 cm is (10 \times 10 \times 10 = 1000 , \text{cm}^3). Given the mass is 100 g, the density is (100 , \text{g} / 1000 , \text{cm}^3 = 0.1 , \text{g/cm}^3). Therefore, the density of the block is 0.1 g/cm³.
The density of gold is 19.3 g cm3 The density of iron pyrite is 5.0 g cm3 If a nugget of iron pyrite and a nugget of gold each have a mass of 50 g what can you conclude about the volume of each nugget?
The nugget of gold has a volume of 2.6 cm3, and the nugget of pyrite has a volume of 10 cm3.
How do you Calculate the density of 820 g silicone occupying a 350 cm cubed container?
Density is calculated by dividing the mass of the substance by its volume. In this case, the density of the silicone can be found by dividing 820 g by 350 cm³. The density of the silicone in this scenario is approximately 2.34 g/cm³.
