0
The hot water is in contact with the metal casing of the radiator, so that metal radiator takes some heat from the water. The heat then passes from the inside metal of radiator to the outside metal of the radiator through convection. The outside metal of the radiator then passes it to the air that is blowing by it outside.
What else can I help you with?
How does thermal energy from a radiator reach the other side of the room?
Hot air from a radiator reaches the other side of a room by convection current. Convection current is when hot water/ air rises, hot water/ air cools, cool water/ air sinks, cool water/ air warms and then the cycle starts over.
When water freezes to become Ice energy must be removed. if this occurs in the freezer section of your refrigerator where does the heat go?
When water freezes into ice in the freezer section of a refrigerator, the heat energy is removed from the water and transferred to the refrigerant in the cooling system. The refrigerant absorbs this heat as it evaporates, moving through the evaporator coils. This heat is then expelled outside the refrigerator through the condenser coils, allowing the cooling process to continue. Essentially, the freezer removes heat from the water and releases it outside the appliance.
What energy does hot water have?
If you mean the water in the oceans, it is the sun's energy that does this. Water absorbs Kinetic Energy to 'heat up'. Therefore, any energy source that can impart Kinetic Energy to Water will heat it.
What is the best way to distribute heat in water?
kinetic energy turns into heat energy which heat's the water SLOWLY (keep frantically moving) ;D
How is heat transferred through a radiator?
Heat is transferred through a radiator primarily by convection. As hot water or steam flows through the radiator, it warms the metal fins of the radiator. The warm metal then heats the surrounding air, which rises and creates a convection current, transferring heat into the room.
What is a better absorber and radiator of heat energy soil or water?
Water absorbs and radiates heat better than soil does.
Why is water put in a radiator?
Water is put in a radiator because it is used to transfer heat from the engine to the outside environment through the process of convection. The water absorbs heat from the engine and then circulates through the radiator to release it, helping to cool the engine and prevent it from overheating.
What type of energy does a radiator use?
A radiator typically uses thermal energy to heat up the surrounding air in a room. This thermal energy is usually generated by either electricity or hot water flowing through the radiator.
What happens to steam as it gives up energy inside the radiator?
As steam gives up energy inside the radiator, it undergoes condensation and transforms back into liquid water. This process releases heat energy that warms up the radiator.
How does heat from a radiator travel outside?
exothermic heat by radiation in physics
How does heat from a radiator transfer?
The heat energy from the radiator transfers that energy to the air molecules next to it. Those molecules then transfer that heat energy to the molecules next to them. This process continues until all the molecules are at the same energy level. This process is call conduction.
What source of energy does a radiator use?
A radiator typically uses thermal energy to heat a space. It is often connected to a central heating system that produces heat from sources such as gas, oil, or electricity, which is then circulated through the radiator to warm the room.
How does heat get from inside the boiler to the wall behind the radiator?
Conduction of heat energy from the source to the water in the boiler. A pump moves the hot water to the radiator.The heat radiates out from the radiator to the air, where convection then circulates it through the room.
Does a radiator use electrical heat?
It depends what radiator you'd like to know about. If the one in a car the answer is yes. Other types of radiators use convection and radiation types of energy. I hope I helped. :) :) :) :) :)
How is thermal energy produced by the furnace transferred to the radiator?
Thermal energy from the furnace is transferred to the radiator through convection. Heated air or water circulates through pipes from the furnace to the radiator, where it releases heat into the room through a process called convection. This heat transfer warms the surrounding air in the room.
How can boiling water be used to generate heat efficiently?
Boiling water can be used to generate heat efficiently by transferring the heat energy from the boiling water to a heating system, such as a radiator or a steam turbine. The high temperature of the boiling water allows for a significant amount of heat energy to be produced, which can then be used to warm up a space or generate electricity.
What is radiator in case of heat engine?
Radiator is a device to cool the heat engin using water as a coolent
