Basic: The larger the diameter the less resistance.
Deep:
R = p (L / A)
The resistance is proportional to the length of the wire divided by its cross-sectional area. p is the resistivity of the material in question and varies greatly. Since area (assuming a circular wire) is A = pi * r2 the larger the diameter of the wire the lower its resistance will be.
AnswerResistance is inversely proportional to the square of the diameter. So, if you double the diameter, you will quarter the resistance. If you halve the diameter, you will quadruple the resistance.
The resistance would remain the same because it is determined by the material and dimensions of the wire, not the presence of an energized soft iron core. The core would become magnetized and the magnetic field around the wire would change, but this would not directly affect the resistance of the wire.
The thickness of a wire, also known as gauge size, can affect the resistance of the wire which in turn can affect the voltage drop across the wire when current flows through it. Thicker wires have lower resistance, resulting in less voltage drop compared to thinner wires for the same current flow.
Copper wire has greater resistance than aluminum wire. This is because copper is a better conductor of electricity than aluminum. This means that copper wire will have less resistance and will be able to carry more current with less energy loss.
Electric current flowing in a wire is opposed by electrical resistance. This resistance is caused by factors such as the material of the wire, its length, and its cross-sectional area. It results in the conversion of electrical energy into heat.
A thicker wire reduces electrical resistance (as does a shorter wire), so more energy will be transported if a thick wire connects a generator to its destination.
The three main factors that affect the resistance in a wire are the material of the wire (different materials have different resistivities), the length of the wire (longer wires have higher resistance), and the cross-sectional area of the wire (thicker wires have lower resistance).
The three main factors that affect resistance in a circuit are the material the wire is made of, the length of the wire, and the cross-sectional area of the wire. Other factors, such as temperature and temperature coefficient of resistance, can also impact resistance.
The four main factors that influence resistance in a wire are the material of the wire, the length of the wire, the cross-sectional area of the wire, and the temperature of the wire. These factors determine how easily electrons can flow through the wire and affect its overall resistance.
You can increase the resistance in the wire, by doing any of the following:Increase the length of the wire.Reduce the wire's cross-section.Change to a material that has a greater resistivity (specific resistance).You can increase the resistance in the wire, by doing any of the following:Increase the length of the wire.Reduce the wire's cross-section.Change to a material that has a greater resistivity (specific resistance).You can increase the resistance in the wire, by doing any of the following:Increase the length of the wire.Reduce the wire's cross-section.Change to a material that has a greater resistivity (specific resistance).You can increase the resistance in the wire, by doing any of the following:Increase the length of the wire.Reduce the wire's cross-section.Change to a material that has a greater resistivity (specific resistance).
Bending a wire can change its resistance due to changes in its length and cross-sectional area. However, resistivity, which is an intrinsic property of the material, remains constant regardless of bending.
Current (measured by an ammeter) and Voltage (measured by a voltmeter) R= V/I Resistance equals voltage divided by current ================================ That's wonderful, but the measurement doesn't "affect" the resistance of the wire. The factors that do "affect" the resistance ... i.e. determine what the resistance will be ... are -- substance of which the wire is composed -- dimensions of the wire: thickness and length.
Factors that affect resistance of electricity include the type of material the wire is made of (e.g. copper vs. aluminum), the length of the wire (longer wires have higher resistance), and the cross-sectional area of the wire (thicker wires have lower resistance). Temperature also affects resistance, with higher temperatures typically leading to higher resistance.
Bends in a wire do not affect its resistance because the cross-sectional area and length of the wire remain the same regardless of the bends. Resistance is determined by these two factors, according to the formula R = ρ*(L/A), where ρ is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area. As long as these parameters remain constant, the resistance of the wire will stay the same.
There are three main factors that affect the resistance of a copper wire: Length of the wire: The resistance of a wire is directly proportional to its length. As the length of the wire increases, the resistance also increases. This is because the longer the wire, the more obstacles (collisions with electrons) the current has to overcome, resulting in higher resistance. Cross-sectional area of the wire: The resistance of a wire is inversely proportional to its cross-sectional area. As the cross-sectional area of the wire increases, the resistance decreases. This is because a larger cross-sectional area provides more space for the flow of electrons, reducing the resistance. Resistivity of the material: The resistance of a wire is also dependent on the resistivity of the material it is made of. Resistivity is an inherent property of the material and is a measure of how much the material opposes the flow of electric current. Copper has a relatively low resistivity compared to other metals, making it a good conductor and suitable for wiring applications. The relationship between these factors and the resistance of a copper wire can be expressed by the formula: R = ρ × (L / A) Where: R is the resistance of the wire ρ (rho) is the resistivity of the material (in this case, copper) L is the length of the wire A is the cross-sectional area of the wire By adjusting these three factors, you can control and manipulate the resistance of a copper wire to suit your specific needs in electrical and electronic applications.
A thicker wire has less resistance than a thinner wire.
Yes, bending the wire can potentially affect its electrical resistance. The resistance of a wire is influenced by its dimensions, material, and temperature. Bending a wire can alter its cross-sectional area, length, or even cause deformations that impact the flow of electrons and increase resistance.
The factor that does not affect the resistance of a material is the color of the material. Resistance is primarily determined by factors such as the material's dimensions, temperature, and composition.