0
What else can I help you with?
What happens to air pressure inside the flask if water levels are not equal?
If the water levels are not equal, the air pressure inside the flask will be higher on the side with the higher water level. This is because the weight of the water creates a greater force on the air below it, increasing the pressure.
Why is the pressure at 14000 ft above sea level 0.69 ATM while the pressure at 14000 ft below sea level is 470 ATM?
The pressure at different altitudes depends on the weight of the air column above that point. At 14000 ft above sea level, there is less air above causing lower pressure (0.69 ATM). Conversely, at 14000 ft below sea level, there is more air above causing higher pressure (470 ATM).
What is the difference of pressure above and below the miniscus of water?
The pressure above the meniscus in water is lower than the pressure below it. This pressure difference results in the upward capillary action observed in narrow tubes containing water.
Is sea level pressure the same as air pressure?
Assuming you are talking about air pressure, atmospheric pressure is created by the weight of the air resting against the earth. the higher up you go, the less air stacked on top of itself, and the pressure is less, until there is no more air at all (space). The pressure of air at sea level is relatively the same around the world because of all the water flows to the same level. this obviously changes with storms and hurricanes - as those move some of the air out of the way. So if you were to go below sea level, there would be more air on top of you, and the pressure would be higher. In death valley (well below sea level) the atmospheric pressure is much higher than at sea level. To answer the question, No, pressure is not negative below sea level. It is greater than at sea level.
How is the can in the pan of water similar to the mercury barometer?
Both the can in the pan of water and the mercury barometer function based on the principle of atmospheric pressure. In both cases, changes in atmospheric pressure will cause a corresponding change in the level of water or mercury in the device. The height of the water or mercury serves as an indicator of the atmospheric pressure at that moment.
What is pressure 1 mile below sea level?
Pressure 1 mile below sea level is approximately 1,525 pounds per square inch (psi). This is due to the weight of the water column above exerting pressure on the depth below.
How artesian wells are formed?
a borehole into the lower stratum below the water level so that pressure forces the water upwards
What is the pressure at 20 meters below sea level?
The pressure at 20 meters below sea level is approximately 3 atmospheres, which is equivalent to about 2,942 millibars or 294.2 kPa. This pressure is due to the weight of the water above exerting force on the area at that depth.
What is the PSI at 1500 feet below sea level?
At 1500 feet below sea level, the pressure increases due to the weight of the water above. Since water exerts approximately 0.43 psi for every foot of depth, the pressure at 1500 feet below sea level would be about 645 psi (1500 feet x 0.43 psi/foot). Adding the atmospheric pressure at sea level, which is about 14.7 psi, the total pressure would be approximately 659 psi.
Why does diving 30m below sea level affect our bodies more than being in a building 30m above sea level?
Diving 30m below sea level increases the pressure on our bodies due to water above compressing our lungs and tissues more. In contrast, at a building 30m above sea level, the pressure is decreasing compared to sea level, but the effects on the body are negligible in most cases. The change in pressure underwater can lead to issues like decompression sickness if not managed properly.
Can you use a barometer below sea level?
Yes, a barometer can be used below sea level to measure atmospheric pressure. However, the reading may be slightly affected by the pressure of the water above it, which needs to be accounted for to obtain an accurate measurement.
Estimate the average air pressure in a hole 500 meters below sea level?
At sea level, atmospheric pressure is around 101,325 Pascals. For every 10 meters of depth in water, pressure increases by about 1000 Pascals. So, at 500 meters below sea level, the pressure would be approximately 111,325 Pascals.
How would the air pressure at the Dead Sea affect the boiling point of water?
The Dead Sea is below mean sea level for the earth; therefore, the pressure at the Dead Sea would be greater than at mean sea level and the boiling point of water would be above 100C.
How much pressure is at 3000 meters below water level?
At a depth of 3,000 meters below water level, the pressure can be calculated using the formula: pressure = depth × density of water × gravitational acceleration. The average density of seawater is about 1,025 kg/m³, and gravitational acceleration is approximately 9.81 m/s². Thus, the pressure at this depth is roughly 30,000 kPa, or about 300 times atmospheric pressure (1 atm being approximately 101.3 kPa).
What happens to air pressure inside the flask if water levels are not equal?
If the water levels are not equal, the air pressure inside the flask will be higher on the side with the higher water level. This is because the weight of the water creates a greater force on the air below it, increasing the pressure.
What is the pressure at 100 meters below sea level?
The pressure at 100 meters below sea level is approximately 11 atmospheres, which is equivalent to about 1,100 kilopascals or 160 pounds per square inch. This increase in pressure is due to the weight of the water column pressing down from above at greater depths.
How do you change the phase of water?
By heating above 100 0C (at standard pressure) or by freezing below 0 0C.
